נגרר סמי-טריילר עם פלטפורמת עבודה

FAYMONVILLE MAX Trailer MAX200 Telesattel Bordwände

Excerpt from the equipment details. Complete specification available on request.

Platform bed
- Extendable platform bed with pneumatically actuated locking mechanism
- Platform bed with approx. 30 mm thick timber floor set in omega profiles
- 10 pairs of fold-down lashing rings (LC 2,500 daN)
- 7 pairs of outward folding lashing rings (LC 5,000 daN)
- 3 pairs of outward folding lashing rings (LC 10,000 daN)
- Loading width approx. 2,480 mm

Landing legs
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)

Axles
- BPW axles, air suspension, with disc brakes (approx. 430 mm), with lift/lower function (ET 120)
- Self-steering axle with electromagnetic reverse lock, can be activated manually or via reverse gear
- Axle tool kit

Tyres
- Tyres: 385/65 R 22.5

Brake system
- Brake system compliant with EU regulations, with EBS-E (2S2M), no pneumatic lines to the tractor unit

Paintwork
- Premium, durable corrosion protection of the standard shot-blasted welded frame, provided by a 2-component (2K) zinc dust primer
- High-quality single-tone topcoat (2K) in RAL 3002 carmine red
- Rear section metallised and finished in RAL 9010 pure white
Kedpfx Asya Shlsh Asdg

Including the following additional features:
- Yellow-red air couplings mounted to the galvanised connection bar at the front
- 2-inch king pin
- Yellow reflective tape in accordance with EU regulations on the sides, extension area, and rear of the trailer
- European reflective plates (red-yellow) at the rear of the trailer
- Platform bed with approx. 30 mm thick timber floor set in omega profiles
- Storage for approx. 1,000 mm long posts in rear centre beam
- 1 spare wheel holder under the platform on the left (in direction of travel)
- Mount for rotating beacon at the rear of the trailer
- Bracket for warning boards including socket on the gooseneck and rear plate, left and right sides
- Load gauge for axle load determination, including load diagram
- Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high
- Foldable aluminium drop sides with rear wing doors (anodised), mounted on the platform sides, approx. 600 mm high, with KINNEGRIP folding stanchions
- Holder for aluminium drop sides under the platform bed ahead of axles
- Holder for KINNEGRIP stanchions under the platform bed behind the axles
- 10 pairs of stanchion sockets for insert stanchions approx. 100 x 50 mm in the outer frame of the platform bed
- Collision protectors left and right on the rear traverse
- 6 pairs of WADER container pockets in the platform, for 1x 20' container, 2x 20' containers or 1x 40' container
- INOX tool box, approx. 600 x 350 x 600 mm, mounted under the platform bed on the left (in direction of travel)
- 4 pairs of stanchion guide rails installed lengthwise on the platform, for insert stanchions 100 x 50 mm
- Lift axle on the front axle with control via TEBS E, depending on the axle load and current load status
- Holder for rotating beacon mounted to the warning boards
- Acoustic reverse warning signal
- 2 LED reversing spotlights mounted on the rear plate
- HRM metallisation (High Resistance Metallisation) of the outer frame.

המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.