מטעין נמוך

Ebert TLS 55 ATV Forst-Teleskop-Tieflader 39,5t

Technical data for the EBERT TLS 43 ATV special low-loader:
Permissible saddle pressure: 19,000 kg, Permissible axle load: 36,000 kg, Permissible total weight: 55,000 kg, Unladen weight according to DIN: approx. 15,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle table length: 3,550 mm, External width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Extension/low-bed to: 3,050 mm, Low-bed/extendable by: 4,000 mm, B-dimension: 13,300 mm, Entire vehicle hot-dip galvanized, with epoxy primer and 2K paint finish, overwidth signage at the front and rear with red/white panels.
Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F

Steering: TRIDEC DLS with Tritronic

Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung

Front upper deck:
Sideboards, 600 mm high, corners angled on the front upper deck, doors accessible from the outside in the corners on the left and right, lockable storage box with a lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to get from the low-bed to the front upper deck, hydraulic coupling for detaching on the left side, 6-way Multi-Faster coupling, 6 tie-down positions, 3,000 kg capacity, on the outside of the upper deck (eye-type tie-down points), 2 tie-down positions, 5,000 kg capacity, on top of the longitudinal beams (towards the rear).
Low-bed:
Climbing aids on the boom - extension, outer frame t=8 mm, low-bed extendable by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 tie-down positions, 10,000 kg capacity, on the outside of the outer frame, 24 insertion pipes 90 x 90, evenly distributed for low-bed extension to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang.
Rear upper deck:
Upper deck sloping and perforated towards the front, for retrofitting ramp attachment profiles, using adapters with a galvanized finish, ramp attachment profiles (Altec) – C rails at the rear, 8 tie-down positions, 10,000 kg capacity, on the outside of the upper deck, 6 tie-down positions, 5,000 kg capacity, in the excavator well, 10 tie-down positions, 5,000 kg capacity, for overwidth on the outer frame, closure of the excavator well at the front and rear with a wooden floor panel (insertable).
Electrical system:
Use NATO coil, energy comes from the towing vehicle, revolving beacon at the rear in the middle, side lights in LED version, standard rear light for vertical mounting (LC5), work lights on the upper deck, to illuminate the low-bed, overwidth signage at the front and rear for controlling the detachment, sensor for securing and pressure switch for the suspension.
Air:
Aluminum air reservoir 80 l, TEBS modulator, locking of extension on the left and right (valve on the side in the rear upper deck), double release valve.
Hydraulics: Hydraulic system on the upper deck for steering, suspension and detachable gooseneck.
Accessories:
Gujdpfx Akjyfu N As Esf
2x 4 pieces of wooden plank as support for extending the low-bed and intermediate table, 2 pieces of securing wedges for detaching, 4 pieces of chock blocks.

Upon request, we will provide you with a leasing or financing offer. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our website. Errors and prior sale are excepted!

Rental possible

GVW: 55,000 kg
Please contact...

המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.