נגרר שלדת מכולותFliegl
Kipp-Container-Chassis SDS 380 30 Fuß
נגרר שלדת מכולות
Fliegl
Kipp-Container-Chassis SDS 380 30 Fuß
שנת ייצור
2026
מצב
חדש
(פועל באופן מלא)
מיקום
Triptis 

נתונים על המכונה
- שם המכונה:
- נגרר שלדת מכולות
- יצרן:
- Fliegl
- מספר מכונה:
- Produktpalette
- שנת ייצור:
- 2026
- מצב:
- חדש
- תפקודיות:
- פועל באופן מלא
מחיר ומיקום
- השכרה:
- אפשרי
- מיקום:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

התקשר
פרטים טכניים
- משקל עצמי:
- 4,660 ק"ג
- משקל טעינה מרבי:
- 33,340 ק"ג
- משקל כולל:
- 38,000 ק"ג
- תצורת סרן:
- 3 סרנים
- אורך כולל:
- 10,450 מ"מ
- רוחב כולל:
- 2,550 מ"מ
- גובה כולל:
- 1,325 מ"מ
- מתלה:
- אוויר
- גודל צמיג:
- 385/55 R22.5"
- מצב הצמיגים:
- 100 אחוז
פרטי ההצעה
- מזהה מודעה:
- A22703912
- עדכון:
- עודכן לאחרונה בתאריך 07.09.2026
תיאור
Tailor-made transport solution
Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are carried out individually to customer requirements.
#Chassis, semi-trailer container
- Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin and 2 kingpin positions
- Front locking on tipping ram mounting bracket with guide wedges on both sides, rear locking on continuous twist-lock shaft with return spring
- Without subframe, for self-supporting containers
- Container mounts: locking crossmember, twin-point for locking 1 x 30 ft container
- 24 t 2-speed landing legs, single-side operation, with straight foot, without slide compensation
- Clear landing leg corner dimension / rear swivel clearance approx. 1850 mm
- 2 wheel chocks with holder
- Aluminium side underrun protection
- without rear underrun protection
- Half-shell mudguards
- with anti-spray mudflaps to EC standard
Gbjdpfjzy N Hksx Adcot
#Hydraulics
- Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection). Caution! Tipping angle limited!
- Hydraulic actuation via truck PTO
- Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut
#Axles + Suspension
- BPW disc brake axles with 430 mm disc diameter
- "Laser-aligned axles/chassis", reducing tyre wear and fuel consumption
- Staggered axle spacing 1410/1310 mm (combined transport) up to 44 t gross train weight
- Air suspension
- 1st axle automatic lift axle, including forced lowering and traction assist, activated by "3x braking" (traction assist functions up to an axle load excess of 30% and up to a speed of max. 25 km/h)
#Braking system
- Two-line compressed-air braking system
- Colour-coded line routing for easy servicing.
- Spring-loaded parking brake
- 2 mismatch-proof coupling heads at the front, without connecting line
- 24 V EBS electronic braking system with EBS socket at the front, without connecting cable
- Caution: the trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS!
- with raise & lower valve
- Vehicle driving stability system
- Axle load detection via EBS CAN bus signal, for display on the cab monitor; the truck must be pre-fitted accordingly, no installation on the truck included (not a calibrated weighing system)
#Wheels and tyres
- 385/55 R22.5" make at the manufacturer's discretion
- Steel rims, factory silver
#Electrics
- 24 V multi-chamber lights, yellow LED side lighting
- 2 white LED position lights at the front
- 2 white/red outline marker lights at the rear
- 2 x 7-pin mismatch-proof sockets at the front, without connecting cable
#Country of registration / Plates
- Type approval to EC 2007/46
- 24/7 service hotline
- prepared for single-line number plate holder
- Contour marking with reflective strips to ECE R048, white on the sides and red at the rear
#Paintwork
- Frame: RAL colour of choice
- "10-year warranty against corrosion perforation"
- Landing legs: black coated
Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are carried out individually to customer requirements.
#Chassis, semi-trailer container
- Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin and 2 kingpin positions
- Front locking on tipping ram mounting bracket with guide wedges on both sides, rear locking on continuous twist-lock shaft with return spring
- Without subframe, for self-supporting containers
- Container mounts: locking crossmember, twin-point for locking 1 x 30 ft container
- 24 t 2-speed landing legs, single-side operation, with straight foot, without slide compensation
- Clear landing leg corner dimension / rear swivel clearance approx. 1850 mm
- 2 wheel chocks with holder
- Aluminium side underrun protection
- without rear underrun protection
- Half-shell mudguards
- with anti-spray mudflaps to EC standard
Gbjdpfjzy N Hksx Adcot
#Hydraulics
- Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection). Caution! Tipping angle limited!
- Hydraulic actuation via truck PTO
- Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut
#Axles + Suspension
- BPW disc brake axles with 430 mm disc diameter
- "Laser-aligned axles/chassis", reducing tyre wear and fuel consumption
- Staggered axle spacing 1410/1310 mm (combined transport) up to 44 t gross train weight
- Air suspension
- 1st axle automatic lift axle, including forced lowering and traction assist, activated by "3x braking" (traction assist functions up to an axle load excess of 30% and up to a speed of max. 25 km/h)
#Braking system
- Two-line compressed-air braking system
- Colour-coded line routing for easy servicing.
- Spring-loaded parking brake
- 2 mismatch-proof coupling heads at the front, without connecting line
- 24 V EBS electronic braking system with EBS socket at the front, without connecting cable
- Caution: the trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS!
- with raise & lower valve
- Vehicle driving stability system
- Axle load detection via EBS CAN bus signal, for display on the cab monitor; the truck must be pre-fitted accordingly, no installation on the truck included (not a calibrated weighing system)
#Wheels and tyres
- 385/55 R22.5" make at the manufacturer's discretion
- Steel rims, factory silver
#Electrics
- 24 V multi-chamber lights, yellow LED side lighting
- 2 white LED position lights at the front
- 2 white/red outline marker lights at the rear
- 2 x 7-pin mismatch-proof sockets at the front, without connecting cable
#Country of registration / Plates
- Type approval to EC 2007/46
- 24/7 service hotline
- prepared for single-line number plate holder
- Contour marking with reflective strips to ECE R048, white on the sides and red at the rear
#Paintwork
- Frame: RAL colour of choice
- "10-year warranty against corrosion perforation"
- Landing legs: black coated
ספק
הערה: הירשם בחינם או התחבר, כדי לקבל גישה לכל המידע.
נרשם מאז: 2006
196 מודעות אונליין
שלח בקשה
טלפון & פקס
+49 36482... מודעות
המודעה שלך נמחקה בהצלחה
אירעה שגיאה


































