משאית שטוחה

VOLVO FH500 6x4 Fassi F545RA 2.27 mit Jib und Winde

VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 Jib and Cable Winch

Liftable drive axle
Liftable axle
Drive axle RTS2370A. Tandem, single reduction, hypoid type. Longitudinal and transverse differential locks.
Front axle load max. 10.0 t (technical)
Rear axle load max. 21 t (technical)
Volvo Dynamic Steering (VDS)
330 L aluminum tank, right side
AdBlue tank usable volume 64 liters
Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter
Electrical connection for trailer, 15-pin
Euro 6, Step E - onboard diagnostics
Cab color: Signal White
Heated and electrically adjustable rearview mirrors, wide-angle mirrors on both sides, ramp mirror on passenger side
Front mirror
Exterior sun visor
LED main headlights
Headlamp cleaning system
Automatic switching between daytime running and dipped beam
Automatic headlight leveling
LED daytime running lights, “V-light”
Front LED fog lights
Static LED cornering light
Two LED roof beacons (orange), mounted front of cab roof
Cab roof penetrations, both sides
Wiring for roof-mounted spotlights, max 280 W
2 air horns on the roof, controlled from steering wheel
Roof antenna and CB radio preparation
Accessory mounting rail, front
Original manufacturer emblems/type designations
Emission type plate (Euro...)
L-plate (low noise vehicle -96)

Flatbed body as steel/welded construction, permanently mounted, low-profile design
Length approx. 4,800 mm, width approx. 2,480 mm
Removable aluminum side boards, Suer brand, height 600 mm, anodized, both sides (right and left)
Removable aluminum side boards, Suer brand, height 600 mm, anodized, both sides (right and left)
Recessed lashing rings, 2,500 daN and 6,500 daN each side, in profiled slots with flexible positioning
6 stakes pockets per side (3 per side)
Hydraulically extendable bed extension, approx. 1,200 mm, hot-dip galvanized, loadable up to 3,000 kg, extendable with lighting and underrun protection, deeply recessed if possible, radio remote-controlled
Sturdy front wall consisting of welded frame with recessed stake storage pockets
Caodpfjx A Nn Tsx Abbea
Cladding plates, mudguards in checker plate, sand-blasted and powder-coated and painted in vehicle color
Toolboxes between the rear axles with checker plate
5 toolboxes, checker plate natural finish, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space
Sand-blasted, powder-coated and painted in vehicle color
Installation of underrun protection at the rear and additional outriggers, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics

F545RA.2.27 xe-dynamic » Base unit
Winch type V 20 for twin-line operation with folding sheave and accessories.

Infinite slewing range
All hydraulic cylinders double acting
Piston rods hard chromed
Double linkage system with PROLINK (knuckle boom can be over-extended by up to 15°)
Electronic overload cut-off system with FX500
FASSI stability control FSC-S/II incl. LMB II
Emergency shutoff and optical alarm at 90% and 100%
Pressure relief and load-holding valves
XF system (Extra Fast) + XP system (Extra Power)
RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in the display
Danfoss D850 valve block with 4 control valves mounted on crane column
Emergency operation for crane control
High-pressure filter supplied plumbed
Separate hydraulic tank (180l) with filter

המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.