מיטה / ברזנטFliegl
SDS 390 RoadRunner
מיטה / ברזנט
Fliegl
SDS 390 RoadRunner
EXW מחיר קבוע בתוספת מע"מ
9,900 €
שנת ייצור
2015
מצב
משומש
מיקום
Triptis 

התמונות מציגות
הצג מפה
נתונים על המכונה
- שם המכונה:
- מיטה / ברזנט
- יצרן:
- Fliegl
- מספר מכונה:
- WFDFLT33902017848
- שנת ייצור:
- 2015
- מצב:
- משומש
- תפקודיות:
- פועל באופן מלא
מחיר ומיקום
EXW מחיר קבוע בתוספת מע"מ
9,900 €
- מיקום:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

התקשר
פרטים טכניים
- משקל עצמי:
- 6,537 ק"ג
- משקל טעינה מרבי:
- 28,463 ק"ג
- משקל כולל:
- 35,000 ק"ג
- תצורת סרן:
- 3 סרנים
- רישום ראשוני:
- 10/2015
- אורך אזור הטעינה:
- 13,650 מ"מ
- רוחב שטח הטעינה:
- 2,480 מ"מ
- גובה תא המטען:
- 2,790 מ"מ
- גודל צמיג:
- 385/65 r22.5
- צבע:
- כסוף
פרטי ההצעה
- מזהה מודעה:
- A9058631
- מספר התייחסות:
- 37357
- עדכון:
- עודכן לאחרונה בתאריך 06.05.2025
תיאור
Further information
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
Bodpfxekyrmis Abbjdk
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
Bodpfxekyrmis Abbjdk
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
ספק
שלח בקשה
טלפון & פקס
+49 36482... מודעות
המודעה שלך נמחקה בהצלחה
אירעה שגיאה










