מכונת כיפוףBluhm Systeme
e-SolarMark FL
מכונת כיפוף
Bluhm Systeme
e-SolarMark FL
מחיר קבוע בתוספת מע"מ
4,800 €
מצב
משומש
מיקום
Borken 

התמונות מציגות
הצג מפה
נתונים על המכונה
מחיר ומיקום
מחיר קבוע בתוספת מע"מ
4,800 €
- מיקום:
- Einsteinstraße 8a, 46325 Borken, Deutschland

התקשר
פרטי ההצעה
- מזהה מודעה:
- A14565049
- מספר התייחסות:
- 23922
- עדכון:
- עודכן לאחרונה בתאריך 15.11.2024
תיאור
Bluhm Systeme marking lasers
Here we offer you a Bluhm Systeme marking laser.
Bluhm Systeme marking laser fiber laser e-SolarMark FL Without function guarantee (untested)
Introduction:
The e-SolarMark FL10W and 30 W are class IV lasers in accordance with the lEC 825
and EN 60825 (standards for end-user applications). It is designed to be
integrated into a system or operated separately with a protective housing.
After installation, the laser system must meet the requirements for a protection class
product in accordance with the above-mentioned directives.
The e-SolarMark is a laser system for marking and engraving plastics,
metals and foils while stationary or in motion.
Technical specifications
e-SolarMark description
The e-SolarMark system consists of two main components:
1. the marking unit with laser head (scanning head) with focusing lens.
2. the control unit contains the power supply unit, electronic control system and firmware
for the system function, I/O slots inside.
The e-SolarMark includes a fixed galvo scanning head equipped with a lens for
a square marking field with standard dimensions of 70 X 70 mm
Laser specification in standard version
Laser Type---Fiber Laser
Laser output power---FL2 model: 19W; typical
Wavelength---1062 nm typical
Internal Modulation---20 to 80 kHz
Scanner Head Description:
Scan Head---Two galvanometric mirror scanners with hard,
Rjdpfsq Rtz Hjx Agien
highly reflective dielectric coating.
F-Theta
Lens types and their characteristics:
Lens marking field 70x70 mm to 300 x 300 mm
Focus distance B 192 mm
Working environment Conditions:
Relative humidity up to 80% non-condensing
Operating temperature 5 - 40°C
Recommended operating temperature 15-25°C
Dimensions W x H x D
Laser unit 122 x 108 x 495 mm
Control unit 520 x 380 x 215 mm
Cable length marking/control unit 3 m
Weight marking unit 5 kg
Weight of control unit 15 kg
Mains voltage
115/230 VAC. 50/60 Hz, single-phase.
Power consumption FL2 model 450W
Type: e-SolarMark FL
Condition: gebraucht / used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
Here we offer you a Bluhm Systeme marking laser.
Bluhm Systeme marking laser fiber laser e-SolarMark FL Without function guarantee (untested)
Introduction:
The e-SolarMark FL10W and 30 W are class IV lasers in accordance with the lEC 825
and EN 60825 (standards for end-user applications). It is designed to be
integrated into a system or operated separately with a protective housing.
After installation, the laser system must meet the requirements for a protection class
product in accordance with the above-mentioned directives.
The e-SolarMark is a laser system for marking and engraving plastics,
metals and foils while stationary or in motion.
Technical specifications
e-SolarMark description
The e-SolarMark system consists of two main components:
1. the marking unit with laser head (scanning head) with focusing lens.
2. the control unit contains the power supply unit, electronic control system and firmware
for the system function, I/O slots inside.
The e-SolarMark includes a fixed galvo scanning head equipped with a lens for
a square marking field with standard dimensions of 70 X 70 mm
Laser specification in standard version
Laser Type---Fiber Laser
Laser output power---FL2 model: 19W; typical
Wavelength---1062 nm typical
Internal Modulation---20 to 80 kHz
Scanner Head Description:
Scan Head---Two galvanometric mirror scanners with hard,
Rjdpfsq Rtz Hjx Agien
highly reflective dielectric coating.
F-Theta
Lens types and their characteristics:
Lens marking field 70x70 mm to 300 x 300 mm
Focus distance B 192 mm
Working environment Conditions:
Relative humidity up to 80% non-condensing
Operating temperature 5 - 40°C
Recommended operating temperature 15-25°C
Dimensions W x H x D
Laser unit 122 x 108 x 495 mm
Control unit 520 x 380 x 215 mm
Cable length marking/control unit 3 m
Weight marking unit 5 kg
Weight of control unit 15 kg
Mains voltage
115/230 VAC. 50/60 Hz, single-phase.
Power consumption FL2 model 450W
Type: e-SolarMark FL
Condition: gebraucht / used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
ספק
הערה: הירשם בחינם או התחבר, כדי לקבל גישה לכל המידע.
נרשם מאז: 2012
שלח בקשה
טלפון & פקס
+49 2861 ... מודעות
ייתכן שגם מודעות אלה יעניינו אותך.
מודעה קטנה
Mudersbach
3,124 km
מכונת כיפוף אופקית
FastechFP 30
FastechFP 30
מודעה קטנה
גרמניה
3,006 km
מכונת כרסום גלגלי שיניים משופעים
KlingelnbergSNC30
KlingelnbergSNC30
מודעה קטנה
Bünde
3,178 km
מכונת כיפוף אופקית
SIMASVT 40 Super
SIMASVT 40 Super
מודעה קטנה
Hürth
3,189 km
צמח אבקה
ROMERProfiSpray V
ROMERProfiSpray V
מודעה קטנה
Skarżysko-Kamienna
2,514 km
מוליך צבע אבקה
ROMER / Catalog pricesProfiSpray
ROMER / Catalog pricesProfiSpray
מודעה קטנה
Wijchen
3,312 km
מכונות כיפוף HACO ERM 43250 2009
HACOERM 43250
HACOERM 43250
מודעה קטנה
Haldenwang
2,825 km
מכונת כיפוף
ZopfAH 40
ZopfAH 40
מודעה קטנה
פולין
3,050 km
SAFAN E-Brake 100-3100
SAFANE-Brake 100-3100
SAFANE-Brake 100-3100
מודעה קטנה
גרמניה
3,006 km
הלהקה ראתה אופקי - אוטומטי-
BERG & SCHMIDK-tech 1200 H
BERG & SCHMIDK-tech 1200 H
מודעה קטנה
Möglingen
2,933 km
ללחוץ מעצור
WeinbrennerGP 250/3550
WeinbrennerGP 250/3550
המודעה שלך נמחקה בהצלחה
אירעה שגיאה












































































































