מכונת גריסה כפולה מסוג ZBSKuhlmeyer
ZBS 3Ex
מכונת גריסה כפולה מסוג ZBS
Kuhlmeyer
ZBS 3Ex
EXW מחיר קבוע בתוספת מע"מ
139,000 €
שנת ייצור
2022
מצב
מכונה לתצוגה
מיקום
Piaseczno 

התמונות מציגות
הצג מפה
נתונים על המכונה
- שם המכונה:
- מכונת גריסה כפולה מסוג ZBS
- יצרן:
- Kuhlmeyer
- דגם:
- ZBS 3Ex
- מספר מכונה:
- 23 03 28 / 1
- שנת ייצור:
- 2022
- מצב:
- כמו חדש (מכונת תצוגה)
- תפקודיות:
- פועל באופן מלא
מחיר ומיקום
EXW מחיר קבוע בתוספת מע"מ
139,000 €
- מיקום:
- Piaseczno, פולין
פרטי ההצעה
- מזהה מודעה:
- A16565521
- עדכון:
- עודכן לאחרונה בתאריך 29.07.2025
תיאור
TWIN BELT GRINDING MACHINE TYPE ZBS
for manual grinding, satin finishing and polishing
- equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit
- free space within the working area by guiding the belts over an upper installed deflection unit
- open and close of upper grinding belt hoods by pneumatic cylinder
- accident protection by movable grinding belt cover
- selectable for front and rear belt
- preselection by 2 potentiometers in the control panel and frequency inverter in high-line version
- with limit switch/operation by movable grinding belt cover
- tension of each grinding belt by pneumatic belt tension device
- the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw
- frequency converter with brake chopper unit for braking in max. 10 s
- grinding belt speed v = 4 - 25 m/s
- emergency-off release line in the working area
- with a sliding table of aluminum-pipe installed between the machine stands
- table movement back and forward by means of 4 soft prism rolls
- max. workpiece weight 100 kg
- motorized table height adjustment by spindles and roller guiding's until max. 780 mm
- spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min
- machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground)
- with a temporary traverse, to remove after adjusting and bolting to the ground
- pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls
- dust extraction tube on the left hand machine stand with D = 200 mm
- necessary extraction power = approx. 3400 m3/h
Hnedpfot Hvkvox Ah Hju
- working area to be illuminated by means of 2 LED lights, adjustable in 3 steps
ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm
Filter included.
Additional info in pdf attached.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
for manual grinding, satin finishing and polishing
- equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit
- free space within the working area by guiding the belts over an upper installed deflection unit
- open and close of upper grinding belt hoods by pneumatic cylinder
- accident protection by movable grinding belt cover
- selectable for front and rear belt
- preselection by 2 potentiometers in the control panel and frequency inverter in high-line version
- with limit switch/operation by movable grinding belt cover
- tension of each grinding belt by pneumatic belt tension device
- the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw
- frequency converter with brake chopper unit for braking in max. 10 s
- grinding belt speed v = 4 - 25 m/s
- emergency-off release line in the working area
- with a sliding table of aluminum-pipe installed between the machine stands
- table movement back and forward by means of 4 soft prism rolls
- max. workpiece weight 100 kg
- motorized table height adjustment by spindles and roller guiding's until max. 780 mm
- spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min
- machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground)
- with a temporary traverse, to remove after adjusting and bolting to the ground
- pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls
- dust extraction tube on the left hand machine stand with D = 200 mm
- necessary extraction power = approx. 3400 m3/h
Hnedpfot Hvkvox Ah Hju
- working area to be illuminated by means of 2 LED lights, adjustable in 3 steps
ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm
Filter included.
Additional info in pdf attached.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
מסמכים
שלח בקשה
המודעה שלך נמחקה בהצלחה
אירעה שגיאה