מכבש כיפוף הידראולי לעומק, טיפוס H, 100/40 טון

CRONOSSTECH CHSP 100/40

CRONOSSTECH CHSP 100/40

H-Type Hydraulic Deep Drawing (Flanging) Press – 8-Guided Slides

General Description

The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and flanging operations. The 8-side guided H-frame structure guarantees maximum rigidity throughout the pressing cycle, maintaining stable parallelism and perpendicularity tolerances over the entire stroke.

The CHSP 100/40 model features a 100-ton main ram and a 40-ton cushion ram (blankholder), specifically designed for precision deep drawing and flanging operations. The frame construction is stress-relieved by vibration to ensure long service life and reliable operation.

⚙️ Standard Equipment

- Steel construction, H-frame body with 8 sliding guides
- Vibration stress-relieved frame structure
- Bronze Zr14 slide bearings
- WPQR and WPS certified welding procedures accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing in compliance with CE standards
- PLC-controlled hydraulic system
- 7” DELTA touchscreen panel
- Adjustable ram and cushion stroke control
- Adjustable ram and cushion tonnage (pressure) control
- Automatic lubrication system
- Electronically monitored filter contamination warning
- On-screen monitoring of hydraulic oil temperature and system status
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER switchgear components

📐 Technical Specifications – CHSP 100/40

- Type: Steel construction, H-frame body with 8 sliding guides
- Frame Material: St52 – ERDEMİR grade
- Slide Bearing: Bronze Zr14
- Capacity (Ram): 100 Tons
- Capacity (Cushion/Blankholder): 40 Tons
- Moving Table Size: 1000 × 1200 mm
- Fixed Table Size: 1000 × 1200 mm
- Parallelism Tolerance: 120 micron/meter
- Perpendicularity Tolerance: 60 micron/meter
- Stroke (Ram): 600 mm
- Stroke (Cushion): 200 mm
- Min. Daylight: 100 mm
- Max. Daylight: 700 mm
- Weld Stress Relief: Vibration stress-relieving
- Welding: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1:2017 (certified welding coordination engineers supervise per EN ISO 14731)
- Max. Operating Pressure: 250 Bar
- Total Motor Power: 11 kW – IE3
- Main Pump: 22 cm³ – REXROTH or PARKER
- Moving Table Rapid Down Speed: 150 mm/sec
- Moving Table Flanging Speed: 12 mm/sec
- Moving Table Return Speed: 170 mm/sec
- Cushion Table Forward Speed: 30 mm/sec
- Main Cylinder Bore: Ø230 mm – Ck45
- Cushion Cylinder Bore: Ø140 mm – Ck45
- Auxiliary Acceleration Cylinders: 2 units
- Approximate Height: 3400 mm
- Approximate Width: 2950 mm
- Approximate Depth: 2000 mm
- Distance from Floor to Lower Table: 1250 mm
- Pre-fill Valve: NG 100
Hedpfx Asx N T Uysk Esnr
- Hydraulic Unit: REXROTH or PARKER
- Cooling System: EMMEGI – CIESSE – PARKER
- Off-line Filtration: REXROTH or PARKER
- Linear Position Transducer: NOVATECHNIK or TURCK
- PLC Application: DELTA
- Touch Panel: DELTA 7”
- Switchgear: SIEMENS – SCHNEIDER
- Approximate Weight: 9 Tons

Production Note

This machine is manufactured by CRONOSSTECH in Turkey.

המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.