מתקן צביעה מלא

Cefla MITO 2B

DIMENSIONS OF PAINTED COMPONENTS

The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as:
• Bent, warped components;
• Components with defects that would render them unsuitable for use even after painting.
• Maximum length 2500 mm
• Minimum length 350 mm
• Maximum width 1300 mm
• Minimum width 50 mm
• Maximum thickness 60 mm
• Minimum thickness 5 mm
• Maximum deflection 10 mm
• Average temperature 15-35 °C
• Minimum temperature -5 °C
• Relative humidity %
• Operating speed 2 [2-3] m/min
• Operating height 900 mm

MATERIAL
• Wood and wood-based materials

END PRODUCT
• Furniture
• Outdoor furniture

SHAPE
• Shaped components
Hsdpfx Aozq Axzsfpor

TYPES OF PAINTS
• Solvent-based paints
• Water-based paints

FINISH
• Transparent
• Matte (< 25)
• Pigmented
• Semi-matte (30-40)

MITO B2: MITO B2 SPRAYING AUTOMAT

Spraying automat with 2 arms, dry air filtration system, and conveyor belt.
Machine designed for continuous coating of various types of profiled panels.
Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt.
Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts.

Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality.

New and patented PLENUM (patented air diffusion system).
Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved.
Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration.

Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine.

Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter.
Tanks with supports for Columbus filters
Fire-resistant ATEX cat. 2G exhaust fan

HCD type belt cleaning and paint recovery system.
Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges.
Cleaning system motor with inverter 1.50 kW.

Easy access system, components removable from the front, ergonomic layout.
Color and product change in seconds (including a spare set).

2 opposite arms with fixed holders for 4 guns, manual height adjustment.
Spraying equipment (pumps, guns) and adaptations are not included in the offer.

2 paint feed circuits with element recirculation and paint filters.
Stainless steel fittings.

המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.