מחרטה מרכזיתWeiler
Primus GS
מחרטה מרכזית
Weiler
Primus GS
VB בתוספת מע"מ
12,500 €
שנת ייצור
1990
מצב
משומש
(פועל באופן מלא)
מיקום
Ubstadt-Weiher 

נתונים על המכונה
- שם המכונה:
- מחרטה מרכזית
- יצרן:
- Weiler
- דגם:
- Primus GS
- שנת ייצור:
- 1990
- מצב:
- מצב טוב מאוד (משומש)
- תפקודיות:
- פועל באופן מלא
מחיר ומיקום
VB בתוספת מע"מ
12,500 €
- מיקום:
- Großer Sand 19-21, 76698 Ubstadt-Weiher, Deutschland

התקשר
פרטי ההצעה
- מזהה מודעה:
- A22216452
- עדכון:
- עודכן לאחרונה בתאריך 26.06.2026
תיאור
Weiler Primus LZ G GS Lead and Draw Spindle Lathe, 3-axis, Heidenhain, Accessories, Very good condition!!!
Technical data:
>> Year of manufacture 1990, Machine no. 4718
>> Center height 120 mm
>> Center distance 430 mm
Ppjdpfx Ahjzg U Efsysu
>> Speed: 60 - 3000 rpm in 18 gear stages
>> Spindle bore 23 mm
>> Short taper spindle head DIN 4
>> Tailstock MK 2
>> Feeds from 0.03 to 0.15 mm/rev
>> Possible threads: metric, inch, module and diametral pitch
>> Metric thread pitches from 0.25 to 2.5 mm
>> Brake motor
>> Weight approx. 360 kg
>> Length 1.2 m, height 1.3 m, depth 0.65 m
Accessories and equipment:
>> 1 three-jaw chuck, 125 mm, with 4 sets of jaws
>> 1 four-jaw chuck, 125 mm, with 2 sets of jaws
>> Collet chuck system, collets from 1-20 mm, in 0.5 mm increments
>> Spindle stop for collets
>> Mulifix size A with 3 steel holders
>> 3 drill chucks
>> Coolant system
About the machine:
Offered for sale is a Weiler Primus GS lead and draw spindle lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are almost as smooth as ground surfaces. Take the opportunity to inspect this machine on site while it is powered up and to convince yourself of its condition.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
Technical data:
>> Year of manufacture 1990, Machine no. 4718
>> Center height 120 mm
>> Center distance 430 mm
Ppjdpfx Ahjzg U Efsysu
>> Speed: 60 - 3000 rpm in 18 gear stages
>> Spindle bore 23 mm
>> Short taper spindle head DIN 4
>> Tailstock MK 2
>> Feeds from 0.03 to 0.15 mm/rev
>> Possible threads: metric, inch, module and diametral pitch
>> Metric thread pitches from 0.25 to 2.5 mm
>> Brake motor
>> Weight approx. 360 kg
>> Length 1.2 m, height 1.3 m, depth 0.65 m
Accessories and equipment:
>> 1 three-jaw chuck, 125 mm, with 4 sets of jaws
>> 1 four-jaw chuck, 125 mm, with 2 sets of jaws
>> Collet chuck system, collets from 1-20 mm, in 0.5 mm increments
>> Spindle stop for collets
>> Mulifix size A with 3 steel holders
>> 3 drill chucks
>> Coolant system
About the machine:
Offered for sale is a Weiler Primus GS lead and draw spindle lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are almost as smooth as ground surfaces. Take the opportunity to inspect this machine on site while it is powered up and to convince yourself of its condition.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
שלח בקשה
טלפון & פקס
+49 7251 ... מודעות
ייתכן שגם מודעות אלה יעניינו אותך.
מודעה קטנה
Burgoberbach
2,868 km
מחרטת ציר עופרת והזנה
WEILERPrimus GS 4443
WEILERPrimus GS 4443
מודעה קטנה
Warszawa
2,614 km
מחרטת מכנית
EMCOcompact 8
EMCOcompact 8
מודעה קטנה
Mindelheim
2,797 km
מחרטה מרכזית
MondialeCeltic 14
MondialeCeltic 14
מודעה קטנה
Waiblingen
2,916 km
מחרטה מרכזית
EMCOMAXIMAT V13
EMCOMAXIMAT V13
מודעה קטנה
Mindelheim
2,797 km
מחיר מיוחד! מקדחת חריטה/כרסום
BernardoFM 50 HSV
BernardoFM 50 HSV
מודעה קטנה
Bruchsal
2,984 km
מחרטת מכונאי / WEILER Primus MDG
WEILERPrimus MD-G
WEILERPrimus MD-G
המודעה שלך נמחקה בהצלחה
אירעה שגיאה















































































