Milling machine with moving column

TOS KUŘIM FREP-D 20X40A

GENERAL MACHINE CHARACTERISTICS

The machine features a rigid gantry design with a movable table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindle heads of type VFS 160. Additionally, the gantry can accommodate one or two lateral (horizontal) spindle heads VFS 160.

The specified spindle head types can be equipped with additional spindle heads, with up to 4 available.

The clamping surface of the machine consists of two connected clamping tables, which can also be used separately when disconnected (only one can be active at a time).

Clamping Table

- Dimensions of one table: 2,000 x 4,000 mm
- Total length of connected tables: 9,000 mm
- Clamping surface of connected tables: 8,500 mm
- Clamping T-slots (width x spacing x quantity): 36mm x 180mm x 11 pcs
- Working table height from base: 1,000 mm
- Load per meter of table length: 5,000 kg
- Table travel: 4,250 mm (connected tables: 9,000 mm)
- Working feed rate: 15 – 3,000 mm/min
- Rapid traverse: 9,000 mm/min

Gantry with Height-Adjustable Crossbeam

- Clearance between columns: 2,750 mm
- Crossbeam vertical adjustment: 2,295 mm
- Crossbeam travel: 750 mm/min

Vertical Spindle Head VFS 160

- Toolholder taper: ISO 60
- Spindle power: 50 kW
- Speed range: 15 – 710 rpm
- Working feed: 10 – 2,000 mm/min
- Rapid traverse: 2,000 mm/min
- Distance from spindle nose to clamping table: 425 – 2,720 mm

Horizontal Spindle Head VFS 160

- Toolholder taper: ISO 60
- Spindle power: 50 kW
- Speed range: 15 – 710 rpm
- Working feed: 5 – 1,000 mm/min
- Rapid traverse: 1,000 mm/min
- Distance from spindle nose to table centering T-slot: 377 – 1,177 mm

Overall Machine Dimensions (L x W x H):
20,720 mm x 8,500 mm x 7,150 mm

Additional Spindle Heads:

NVS Head (Extension Adapter)

- Toolholder taper: ISO 60
- Speed: 15 – 710 rpm
- Max. transmitted power from 60 rpm = 40 kW
- Max. torque: 6,500 Nm

HFUS Head (Universal Milling Head)

- Toolholder taper: ISO 60
- Speed: 15 – 710 rpm
- Max. transmitted power from 80 rpm = 22 kW
Chodexpudtopfx Ag Djd
- Max. torque: 2,700 Nm
- Swivel range vertical axis: 360°
- Swivel range horizontal axis: 360°
- Quill adjustment: 50 mm

HFOS Head (Double-Sided Right-Angle Milling Head)

- Toolholder taper: ISO 60
- Speed: 15 – 710 rpm
- Max. transmitted power from 60 rpm = 40 kW
- Max. torque: 6,500 Nm

המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.