Sartorius Stedim biotech BioWelder 16370

Sartorius 16370

Sartorius Stedim biotech BioWelder 16370

The BioWelder uses a thermal welding cycle that does not require laminar flow.
With this welding method, the blade is kept sterile and endotoxin-free throughout the process.

The inserted tubes are cut with a knife and then fused together by the device.
The cycle process is fully automated and is only released after a complete cycle.

Various programmable holders allow thermoplastic tubing of the same type (e.g., C-Flex, Sanipure, Pharmed) with diameters from 1/4" (6.4 mm) to 3/4" (19.0 mm) to be fused together.

Features:

Fully automatic operation
Welds thermoplastic tubing up to 3/4" outside diameter
Preloaded settings for C-Flex, Raumedic FluiSoftTM, AdvantaPure, AdvantaFlex, Pharmed, and Sanipure tubing
True Thermal Weld provides exceptional strength
Aseptic connection without laminar flow hood
Data output through a printer
Compact design, portable
Easy to validate, with validation equipment
Can weld many different tube diameters

Includes: Tube holder
SH1 5/8″ 15.9 mm outer diameter inserts (1 set).

Manufacturer Specifications:

Housing: stainless steel
Interface: RS232 for printer
Blade: Cr-Ni alloy, single use.
Ambient temperature 20°C-30°C (ideal: 22°C).
Relative humidity: 20%-80% (ideal: 60%)
Temperature sensor: type K, calibration
max. pipe OD: 3/4"
minimum. Tube OD: 1/4"
Welding cycle: 60-90 sec. depending on pipe dimension


You can find more biofields - new and used - in our store!
International shipping costs on request!
Todpfx Aekq Ay Ioaxof