מרכז עיבוד אנכי

Matsuura MAM72-25V PC-2

TECHNICAL DETAILS
B Axis: +110° to -110°
C Axis: 360°
Table Indexing B and C Axes: 0.001°

Workpiece
Max. Workpiece Size: Ø 250 × Height 250 mm
Max. Table Load: 40 kg

Pallet System
Pallet Size: Ø 130 mm
Max. Workpiece Size on Pallet: Ø 250 × Height 250 mm
Max. Pallet Load: 40 kg
Pallet Interface: Capto C6

Spindle
Spindle Speed Range (standard): 50 - 15,000 rpm
Spindle Taper: BT 40 JIS B 6339 Big+
Spindle Motor Power with FANUC Drive: 7.5 / 5.5 kW
Max. Torque: 65.1 Nm at 1,100 rpm

Rapid Traverse and Feed Rates
Rapid Traverse X, Y, Z Axis: 50,000 mm/min
Rapid Traverse B Axis: 30 rpm
Rapid Traverse C Axis: 50 rpm
Feed Rate X, Y, Z Axis: 1…50,000 mm/min
Feed B Axis: 30 rpm
Feed C Axis: 50 rpm

Tool Changer
Max. Tool Weight: 10 kg
Max. Tool Diameter (all positions occupied): Ø96 mm
Max. Tool Diameter (adjacent positions free): Ø150 mm
Max. Tool Length: 300 mm

Guides
Axis Guides: Roller Guides
Lubrication: Permanent grease lubrication
Ball Screws X, Y, Z Axis Ø: 36 mm
Pitch: 16 mm

Axis Drives
X, Y, Z Axis Power: 4.5 / 4.5 / 5.5 kW
B, C Axis Power: 4.5 / 2.5 kW
Axial Force X, Y, Z Axis: kN

MACHINE DETAILS
Control: MATSUURA G-Tech 30i (FANUC 30i MA)
Serial Number: SN17224

Weight & Dimensions
Standard Machine Weight: 7,800 kg
Machine with PC-2: 8,600 kg
Machine Height Above Floor: 2,705 mm
Width: 2,281 mm
Depth: 3,665 mm

Electrical Data
Total Connected Load (Standard machine): 32 kVA
Supply Voltage: 3 x 400 V, 50 Hz
Compressed Air Connection: 5.5-9.5 bar

EQUIPMENT
5-axis simultaneous control
Expanded tool magazine capacity to 40 tool positions
Pallet changer with 2 pallets, 130 mm diameter
Direct measuring system (Heidenhain) for X, Y, and Z axes with seal air supplied

KNOLL cooling system:
1 scraper belt or hinge belt chip conveyor with lift pump and chip discharge to the operator side (Type: 500 K-1/10, year of manufacture 2010)
1 coolant supply through the spindle with coolant pump KTS25-50T, output 31 l/min at 70 bar, 5.5 kW, pressure switchable in 3 stages
1 external cooling with coolant pump, output 100 l/min at 1.4 bar
1 coolant flushing with coolant pump, output 100 l/min at 1.4 bar
1 compact filter KF200, filter capacity 200 l/min

2 spiral auger conveyors in the machine
RENISHAW OMP 60 measuring system for automatic workpiece zero-point setting and measuring via the tool chan