מקדחת רדיאלית מהירה CNC

DONAU Danumeric 440

Machine Specification
• Work table 1800 x 600 mm with 4 T-slots
• Traversing arm travel 1050 mm
• Drilling spindle SK 40 with tool clamping device
• Infinitely variable speed programming
• Infinitely variable quill feed via three-phase servo motor
• 2 T-slots, 18 mm, rear side of machine base
• 2 T-slots, 18 mm, left side of machine base
• Thread cutting unit
• Central lubrication
• Coolant system
• Machine light
• CE marking
• Safety device
• USB interface

Dimensions and Travel Ranges
Tool holder: SK 40
Column diameter: 195 mm
Table dimensions: 1800 x 600 mm
Number of T-slots: 4
Distance between T-slots: 125 mm
Quill travel (Z-axis): 200 mm
Column travel (W-axis): 410 mm
Distance spindle nose – table (min): 70 mm
Distance spindle nose – table (max): 680 mm
Distance spindle nose – floor (min): 970 mm
Distance spindle nose – floor (max): 1580 mm
Drilling radius: 540 – 1590 mm
Working table height: 900 mm

Machining Capacities
Drilling capacity (solid):
St 60: ⌀ 40 mm
GG 22: ⌀ 50 mm
Tapping:
St 60: M36
GG 22: M42

Main Spindle Drive
AC motor, frequency controlled: 5.5 kW at 100% duty cycle
Speed range: 15 – 2800 rpm
Torque: max. 250 Nm
Constant torque from 15 – 2000 rpm

Feed Drives
X-axis - AC servo motor: 0.25 kW
Y-axis - AC servo motor: 0.25 kW
Z-axis - AC servo motor: 4.50 kW
W-axis - AC servo motor: 2.50 kW
Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min
Rapid traverse (W): 3 m/min
Infinitely variable feeds: 5 – 2000 mm/min

Accuracy
Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm

Electrical Data
Operating voltage/frequency: 400 V / 50 Hz
Control voltage: 24 V
Hydraulic unit for clamping: 0.75 kW
Total connected load: 13.0 kVA

Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg

CNC Control
Axes: 4 (X, Y, Z, W), expandable
Processor: 32-bit CPU
Pgjdpfxsyxw Ddo Agisi
Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm
Position indication: Cartesian or polar, absolute or incremental
Measurement units: mm or inch or degrees
Interpolation: 2 axes (X, Y)

Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions
Tool management: max. 500 tools
Subprogram function: yes

Machining Cycles

Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions
Zero point determination: cycles for determining reference points by manual probing of the workpiece for:
- Arbitrary clamped rectangular parts
- Arbitrary clamped round parts
- Centering of cast and flame-cut parts
- Angle position detection for round parts by probing reference edges or surfaces
Test graphics: Graphical display of drilling patterns

המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.