ערכת ריתוך

Bielomatik K3633/023 K3633 023

Here we offer you a Bielomatik laser welding system.
Bielomatik laser welding system
Machine description:
The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame.
The tools are mounted on a 2-station rotary table that rotates 180 degrees with each cycle.
In the middle part of the machine frame, there is the working area with the welding station, the tool (on the rotary table), and the clamping device for the product.
The control cabinet is installed at the rear.
The welding station is protected against the loading/unloading area with a laser-safe enclosure.
The welding laser (the laser power supply) is switched off when a maintenance door is opened.
The loading and unloading of the welding parts is done manually. The welding process runs automatically.
Laser type: YLR-300-AC-Y11/IPG
The cell was used for laser welding of various plastic parts (front frames).
For components with dimensions of approximately 460 x 280 mm.
Basic data
Machine equipment:
1 complete machine frame with enclosure, substructure, and safety devices, painted
Adjustable machine feet, designed for transport with a forklift.
3 manual maintenance doors in the laser-safe processing area, each secured with a safety door switch with interlock.
4 manual maintenance doors below the machine table.
The control cabinet is permanently mounted on the rear of the machine. Laser system manufactured by IPG.
1 fiber laser, 300W cw, at the fiber optic end, 1070nm, completely air-cooled.
1 power supply for the laser unit, target beam laser, and fiber optic cable.
1 Vario-Scan for 3D welding contour.
1 scanner - 20 aperture.
Optics, F-Theta lens, focal length determines the processing field and processing distance.
2x base tool, tool coding with transponder.
Clamping/tensioning system for holding a mask with absolute encoder.
with pneumatic clamping system for controlled pressing of each welding part.
Pneumatic air shower for protection of the lens housing. Microbox PC427B incl. RTX (Siemens).
Pre-installed software, Siemens S7 PLC.
Profibus, Profinet, Ethernet, RS232 interface.
Touch panel 15" for operation and input of data/parameters. Machine lighting.
Connection flange for external extraction system.
Machine data:
Dimensions:
Machine W x D x H: approx. 2330 x 2350 x 2500mm
Lrsdezgaazopfx An Eon
Control cabinet:
Permanently screwed to the machine frame.
Area required W x D: 5400 x 5400mm
Technical data:
Power supply:
Number of phases/rated voltage 3x400V 50Hz
Connected load 5KVA
Fuse rating: 16A
Exhaust:
Nominal size ∅160
Airflow rate 500-1000 m³/h
Weight approx. 2000 kg
Type: K3633/023
Condition: used
(Changes and errors in the technical data are reserved!)
We are happy to answer any further questions you may have by telephone.

המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.