Arburg ALLROUNDER 720 S 3200-1300Arburg
ALLROUNDER 720 S 3200-1300
Arburg ALLROUNDER 720 S 3200-1300
Arburg
ALLROUNDER 720 S 3200-1300
שנת ייצור
2016
מצב
משומש
מיקום
גרמניה 

נתונים בסיסיים
- שם המכונה:
- Arburg ALLROUNDER 720 S 3200-1300
- יצרן:
- Arburg
- שנת ייצור:
- 2016
- מצב:
- מוכן לעבודה (יד שניה)
- שעות עבודה:
- 37,890 h
מחיר ומיקום
- מיקום:
- , גרמניה

התקשר
פרטים טכניים
כוח קיבוע:
3,200 קילו ניוטון
פרטי ההצעה
- מזהה מודעה:
- A23346005
- מספר התייחסות:
- DE-INJ-ARB-2016-00009
- עדכון:
- עודכן לאחרונה בתאריך 17.11.2026
תיאור
Hydraulic injection moulding machine manufactured in 2016. This ARBURG ALLROUNDER 720 S 3200-1300 has a clamping force of 3,200 kN and a 55 mm screw diameter. It includes a SELOGICA direct control unit and an ARBURG MULTILIFT SELECT robot with a 15 kg payload. Consider the opportunity to buy this ARBURG ALLROUNDER 720 S 3200-1300 hydraulic injection moulding machine. Contact us for further details.
Iisdpj Akr Izsfx Ai Iei
- Clamping Force: 3,200 kN (320 tonnes)- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor/Heating Rated Current: 125 / 70 A- Total Connected Load: 124 kW- Clamping Unit / Technology: Technology Stage 2 (servo-regulated) with two variable displacement pumps; programmable and regulated clamping force buildup held via servo-regulated second pump- Screw Diameter: 55 mm (wear- and corrosion-resistant plasticising cylinder unit with sintered metal non-return valve)- Screw Coupling: Reinforced spline geometry for high continuous dosing torques- Nozzle: Open nozzle 55 mm with internal thread M36x2, extended nozzle tip by 25 mm (R 35), equipped with heating band- Needle Shut-off Nozzle Controls: Electrical and hydraulic control for 4 hydraulic needle shut-off nozzles in mould (for Injection 1)- Platen / Centring: Central injection position, 160 mm centring diameter- Mould Height Adjustment: Automatic mould height adjustment via SELOGICA control- Core Pull Controls: 3 core pull units (1st core pull servo-regulated for simultaneous/serial movements with programmable pressure/flow; 2nd and 3rd core pull controls for serial movements with check valve holding pressure and programmable pressure/flow)- Hot Runner Zones: 9 additional heating control zones for mould heating (max. 2 kW / 230 V per circuit, HAN 24 E connector, Hasco pinout), with zones 1–3 having increased power up to 3.6 kW / 230 V (16 A each)- Cooling Circuits: Regulated machine cooling circuits; separate machine and mould cooling lines; 4 free cooling circuits on fixed platen; 4 free cooling circuits on movable platen (without shut-off valves); water-cooled electrical switch cabinet- Hydraulic System: ARBURG Energy Saving System (AES) with variable-speed water-cooled drive motor (applicable for 15–75 kW, 380–480 V, 50–60 Hz); continuous oil circulation with auxiliary pump for bypass filtration/cooling- Control Unit: SELOGICA direct interface with touchscreen display (15-inch / 38.1 cm) and sequence editor- Software & Option Packages: Productivity package, Extended Movements package, Production Control package, Extended Monitoring package, Optimization/Operating Aids package, Quality Assurance package, Documentation package (actual value log)- Electrical / Interfaces: CompactFlash interface; EUROMAP chip card authorization; Mobile SELOGICA AMS connection; EUROMAP 67 robot interface (50-pin); EUROMAP 73 safety fence door interlock interface; temperature control unit interface (20 mA, up to 6 units); colour dosing unit interface; USB printer serial interface; 4 freely programmable I/O channels; socket combination (1x CEE, 1x Schuko 230 V plus additional switchable combination)- Blow-off Units: Electrical preparation for retrofitting air blow-off units 1 & 2- Machine Mounts: Vibration-damping elastomeric machine mounts (Schwingmetall)- Optional Automation / Robot: ARBURG MULTILIFT SELECT 15KG transverse robot - Robot Weight: 450 kg - Max. Handling Payload: 15 kg - Control Unit: SELOGICA - Pneumatic Operating Pressure: 0.
Iisdpj Akr Izsfx Ai Iei
- Clamping Force: 3,200 kN (320 tonnes)- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor/Heating Rated Current: 125 / 70 A- Total Connected Load: 124 kW- Clamping Unit / Technology: Technology Stage 2 (servo-regulated) with two variable displacement pumps; programmable and regulated clamping force buildup held via servo-regulated second pump- Screw Diameter: 55 mm (wear- and corrosion-resistant plasticising cylinder unit with sintered metal non-return valve)- Screw Coupling: Reinforced spline geometry for high continuous dosing torques- Nozzle: Open nozzle 55 mm with internal thread M36x2, extended nozzle tip by 25 mm (R 35), equipped with heating band- Needle Shut-off Nozzle Controls: Electrical and hydraulic control for 4 hydraulic needle shut-off nozzles in mould (for Injection 1)- Platen / Centring: Central injection position, 160 mm centring diameter- Mould Height Adjustment: Automatic mould height adjustment via SELOGICA control- Core Pull Controls: 3 core pull units (1st core pull servo-regulated for simultaneous/serial movements with programmable pressure/flow; 2nd and 3rd core pull controls for serial movements with check valve holding pressure and programmable pressure/flow)- Hot Runner Zones: 9 additional heating control zones for mould heating (max. 2 kW / 230 V per circuit, HAN 24 E connector, Hasco pinout), with zones 1–3 having increased power up to 3.6 kW / 230 V (16 A each)- Cooling Circuits: Regulated machine cooling circuits; separate machine and mould cooling lines; 4 free cooling circuits on fixed platen; 4 free cooling circuits on movable platen (without shut-off valves); water-cooled electrical switch cabinet- Hydraulic System: ARBURG Energy Saving System (AES) with variable-speed water-cooled drive motor (applicable for 15–75 kW, 380–480 V, 50–60 Hz); continuous oil circulation with auxiliary pump for bypass filtration/cooling- Control Unit: SELOGICA direct interface with touchscreen display (15-inch / 38.1 cm) and sequence editor- Software & Option Packages: Productivity package, Extended Movements package, Production Control package, Extended Monitoring package, Optimization/Operating Aids package, Quality Assurance package, Documentation package (actual value log)- Electrical / Interfaces: CompactFlash interface; EUROMAP chip card authorization; Mobile SELOGICA AMS connection; EUROMAP 67 robot interface (50-pin); EUROMAP 73 safety fence door interlock interface; temperature control unit interface (20 mA, up to 6 units); colour dosing unit interface; USB printer serial interface; 4 freely programmable I/O channels; socket combination (1x CEE, 1x Schuko 230 V plus additional switchable combination)- Blow-off Units: Electrical preparation for retrofitting air blow-off units 1 & 2- Machine Mounts: Vibration-damping elastomeric machine mounts (Schwingmetall)- Optional Automation / Robot: ARBURG MULTILIFT SELECT 15KG transverse robot - Robot Weight: 450 kg - Max. Handling Payload: 15 kg - Control Unit: SELOGICA - Pneumatic Operating Pressure: 0.
ייתכן שגם מודעות אלה יעניינו אותך.
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Moretonhampstead
3,851 km
מכונת הזרקת פלסטיק
ArburgALLROUNDER 570 E 2000-800
ArburgALLROUNDER 570 E 2000-800
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Iszkaszentgyörgy
2,290 km
מכונת הזרקת פלסטיק CNC
Arburg720S 3200/1300
Arburg720S 3200/1300
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Burgoberbach
2,868 km
מכונת הזרקת פלסטיק
ArburgALLROUNDER 720 H 3200-1300 244136
ArburgALLROUNDER 720 H 3200-1300 244136
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Trenčianske Stankovce
2,436 km
SEPRO Erfolg 7 (2017)
SEPROSuccess 7
SEPROSuccess 7
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Schwaigern
2,956 km
מכונת הזרקת פלסטיק
Arburg570 S 2200-800 mit Multilift Select
Arburg570 S 2200-800 mit Multilift Select
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Trenčianske Stankovce
2,436 km
ארבורג 720S 3000 - 1300 (2017)
Arburg720S 3000 - 1300
Arburg720S 3000 - 1300
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Borken
3,250 km
מכונת הזרקת פלסטיק Wittmann Battenfeld SmartPower 210/1330 עם מערכת שליטה UNILOG B8
Wittmann/BattenfeldWittmann
Wittmann/BattenfeldWittmann
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Heilbronn
2,945 km
מכשיר טיפול SEPRO (art.5165)
SEPROSR 4010 S3
SEPROSR 4010 S3
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Trenčianske Stankovce
2,436 km
ארבורג 720S 3000 - 1300 (2016)
Arburg720S 3000 - 1300
Arburg720S 3000 - 1300
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Mierlo
3,298 km
מכונת השחזה שטוחה
RogiFSG-2050A
RogiFSG-2050A
המודעה שלך נמחקה בהצלחה
אירעה שגיאה






















































































































































