משייפת סרט רחבהA.Costa
KKH-CCT+CCT 1350
משייפת סרט רחבה
A.Costa
KKH-CCT+CCT 1350
שנת ייצור
2008
מצב
משומש
(פועל באופן מלא)
מיקום
Trondheim 

נתונים בסיסיים
- שם המכונה:
- משייפת סרט רחבה
- יצרן:
- A.Costa
- דגם:
- KKH-CCT+CCT 1350
- שנת ייצור:
- 2008
- מצב:
- מוכן לעבודה (יד שניה)
- תפקודיות:
- פועל באופן מלא
מחיר ומיקום
- מיקום:
- Stokkanhaugen 116, 7048 Trondheim, Norway

התקשר
פרטים טכניים
פרטי הספק
מתח כניסה:
400 V
תדירות כניסה:
50 הרץ
סוג זרם כניסה:
מזגן
פרטים נוספים
גובה השחזה:
160 מ"מ
רוחב השחזה:
1,250 מ"מ
פרטי ההצעה
- מזהה מודעה:
- A23314455
- עדכון:
- עודכן לאחרונה בתאריך 10.11.2026
תיאור
Working width 1250 mm.
Longitudinal sanding belt length mm. 2620
Standard working thickness mm. 3÷160
3 units from the bottom
3 units from the topp
First machine:
1st Bottom Working unit:
C250 - Working unit with cylinder ø mm. 250
Motor with one speed of rotation, with power kW 37
Cutting speed of sanding belt m./sec. 30
Cylinder with rubber surface and helicoidal grooves for cooling, hardness Sh 90
Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency.
Motor with one speed of rotation, with power kW 30
Cutting speed of sanding belt m./sec. 25
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
3rd Bottom Working unit:
T1 - Pneumatic pad unit with electronic control of timing of entry and adjustable pressure
Motor with one speed of rotation, with power kW 18
Cutting speed of sanding belt m./sec. 16
Second machine:
1st Top Working unit:
C250 - Working unit with cylinder ø mm. 250 - Complete with: sanding belt tensioning unit;
Electronic oscillation; dust hoods; safety systems. Is included an eccentric mechanism to compensate the variation of thickness of the abrasive belt.
Cylinder with steel surface and helicoidal grooves for cooling C-steel
Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency.
Motor with one speed of rotation, with power kW 37
Cutting speed of sanding belt m./sec. 30
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
2nd Top Working unit:
C250 - Working unit with cylinder ø mm. 250 - Complete with: sanding belt tensioning unit;
Electronic oscillation; dust hoods; safety systems. Is included an eccentric mechanism to compensate the variation of thickness of the abrasive belt.
Cylinder with rubber surface and helicoidal grooves for cooling, hardness Sh 90
Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency.
Motor with one speed of rotation, with power kW 30
Cutting speed of sanding belt m./sec. 25
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
3rd Top Working unit:
T1 - Pneumatic pad unit with electronic control of timing of entry and adjustable pressure of contact element; contact insert made by a graphite cloth + felt + steel blade, assembly easily
Hfjdpfx Ae Aiua Defhsp
interchangeable; depth of deployment mechanically adjustable
Motor with one speed of rotation, with power kW 18
Cutting speed of sanding belt m./sec. 16
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
S180 - Nylon brush unit for cleaning processed work-pieces - motor kW. 1,1 ø mm.180
SR - Rotary blowers for blowing the dust.
For technical specification please read included data sheet below.
This CCT 1350 line are stil in use here in Norway, will be ready for dissembling from 20 of December 2026.
Longitudinal sanding belt length mm. 2620
Standard working thickness mm. 3÷160
3 units from the bottom
3 units from the topp
First machine:
1st Bottom Working unit:
C250 - Working unit with cylinder ø mm. 250
Motor with one speed of rotation, with power kW 37
Cutting speed of sanding belt m./sec. 30
Cylinder with rubber surface and helicoidal grooves for cooling, hardness Sh 90
Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency.
Motor with one speed of rotation, with power kW 30
Cutting speed of sanding belt m./sec. 25
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
3rd Bottom Working unit:
T1 - Pneumatic pad unit with electronic control of timing of entry and adjustable pressure
Motor with one speed of rotation, with power kW 18
Cutting speed of sanding belt m./sec. 16
Second machine:
1st Top Working unit:
C250 - Working unit with cylinder ø mm. 250 - Complete with: sanding belt tensioning unit;
Electronic oscillation; dust hoods; safety systems. Is included an eccentric mechanism to compensate the variation of thickness of the abrasive belt.
Cylinder with steel surface and helicoidal grooves for cooling C-steel
Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency.
Motor with one speed of rotation, with power kW 37
Cutting speed of sanding belt m./sec. 30
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
2nd Top Working unit:
C250 - Working unit with cylinder ø mm. 250 - Complete with: sanding belt tensioning unit;
Electronic oscillation; dust hoods; safety systems. Is included an eccentric mechanism to compensate the variation of thickness of the abrasive belt.
Cylinder with rubber surface and helicoidal grooves for cooling, hardness Sh 90
Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency.
Motor with one speed of rotation, with power kW 30
Cutting speed of sanding belt m./sec. 25
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
3rd Top Working unit:
T1 - Pneumatic pad unit with electronic control of timing of entry and adjustable pressure of contact element; contact insert made by a graphite cloth + felt + steel blade, assembly easily
Hfjdpfx Ae Aiua Defhsp
interchangeable; depth of deployment mechanically adjustable
Motor with one speed of rotation, with power kW 18
Cutting speed of sanding belt m./sec. 16
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
S180 - Nylon brush unit for cleaning processed work-pieces - motor kW. 1,1 ø mm.180
SR - Rotary blowers for blowing the dust.
For technical specification please read included data sheet below.
This CCT 1350 line are stil in use here in Norway, will be ready for dissembling from 20 of December 2026.
מסמכים
ספק
הערה: הירשם בחינם או התחבר, כדי לקבל גישה לכל המידע.
נרשם מאז: 2002
5 מודעות אונליין
שלח בקשה
טלפון & פקס
+47 90 96... מודעות
ייתכן שגם מודעות אלה יעניינו אותך.
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Kolding
3,372 km
קו אריזת פרקט אוטומטי בניילון מתכווץ
CSP ENGINEERINGPAR
CSP ENGINEERINGPAR
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Київ
2,185 km
קו ייצור פרקט
LEDINEKROTOLES 400 D – S
LEDINEKROTOLES 400 D – S
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Saint-Nicolas-de-Redon
3,626 km
משייפת סרט רחבה
SCMSandya CL3G RTT 110k
SCMSandya CL3G RTT 110k
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Kehra
3,229 km
מכונת עיצוב
WeinigE3 infeed + A3 outfeed
WeinigE3 infeed + A3 outfeed
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Vall de Uxó
3,303 km
A. Costa Leopard רב-דיסקית דיסק
A. CostaLeopard
A. CostaLeopard
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Ben Arous
2,355 km
קו שִׁעוּר ארבע-צדדי מלא CELASCHI
CELASCHITSA5215 – TSA5218 – TSA5220
CELASCHITSA5215 – TSA5218 – TSA5220
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Kaunas
2,793 km
מלטשת חגורה רחבה
DMCEuropa 110 RP
DMCEuropa 110 RP
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Knebel
3,377 km
מברז כפול
HOMAGFL 66/25/11 (1)
HOMAGFL 66/25/11 (1)
המודעה שלך נמחקה בהצלחה
אירעה שגיאה




































































































































