מערכת גימור צבע

Wagner

Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing.

Maximum part size: L x W x H = 2600 x 400 x 1850 mm

Equipment

Technological conveyor

Automatic speed V = 1.2 m/min
Speed regulation from 0.5 to 2.5 m/min
Preparation station MNA-3-LPG, total length 16.7 m

Entry area: L = 2.5 m
a. Washing, degreasing and phosphating: L = 3.6 m

Number of spray frames – 10
Number of nozzles in the frame – 18
Total number of nozzles – 180
Pump capacity – 162 m³/h
Pump power – 15 kW
4 m³ capacity for active liquid
Internal heat exchanger with LPG burner – 160 kW
Temperature – 50°C
Mechanical oil separator
Filtration system
Dosing system with diaphragm pump and regulator
Washing time – 3 min
b. Drip zone L = 3.1 m

Drip time – 2 min 30 sec
c. First rinse L = 1.2 m

Number of spray frames – 4
Number of nozzles in the frame – 18
Total number of nozzles – 64
Pump capacity – 38 m³/h
Pump power – 3 kW
1.5 m³ water capacity
Rinse time – 1 min
d. Drip zone L = 3.1 m

Drip time – 2 min 30 sec
e. Fine rinse L = 1.28 m

Number of spray frames – 3
Number of nozzles in the frame – 18
Total number of nozzles – 54
Pump capacity – 33 m³/h
1.5 m³ water capacity
Pump power – 3 kW
Additional spray frame
Rinse time – 1 min
f. Drip zone L = 2 m

Drip duration – 1 min 40 sec
Three connections for the extraction system with three fans
Working zone made of stainless steel
Pipes made of PVC or stainless steel

1 pc.

Automatic dryer after washing AST-1-KLPG:

Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm
Air curtains on each side to reduce heat loss
Indirect heat exchanger, heated by LPG, 200 kW
Three fans, air supply 6000 m³/h
Two connections for the extraction system
Temperature sensor and regulator
Overheating sensor
Circulation sensor
Working zone made of galvanized steel
Thermal insulation 200 mm thick
Drying time – 10 min
1 pc.

Automatic polymerization oven APT-2-KLPG

Working area dimensions L x W x H = 10200 x 3600 x 2800 mm
Air curtains on one side to reduce heat loss
Two indirect heat exchangers heated by LPG, each 300 kW
Gsdpfxev Ed Ukj Ak Ejbr
Eight circulation fans, each with a capacity of 6000 m³/h
Two connections for the exhaust system
Temperature sensor and regulator
Overheating sensor
Circulation sensor
Working area made of galvanized steel
Thermal insulation 200 mm thick
Polymerization time – 25 min
1 pc.

Overhead rail transportation system for ATR paint shop:

Straight rail with hangers L = 400 mm – 146 m
Drive station – 2 pcs.
Tension station – 1 pc.
Chain lubrication station – 1 pc.
Rail support structure drawings – 1 set.

המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.