מייבש שבבי עץSPE Renergi
מייבש שבבי עץ
SPE Renergi
מחיר קבוע בתוספת מע"מ
25,000 €
מצב
משומש
מיקום
Cēsis 

התמונות מציגות
הצג מפה
נתונים על המכונה
מחיר ומיקום
מחיר קבוע בתוספת מע"מ
25,000 €
- מיקום:
- Valmieras iela 20A, LV4101 Cesis, LV

התקשר
פרטי ההצעה
- מזהה מודעה:
- A19296676
- עדכון:
- עודכן לאחרונה בתאריך 11.11.2025
תיאור
SPE Renergi Low Temperature Dryer.
The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels.
The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C.
Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur.
Laedpfewp Rqfox Ad Isi
Power supply Data:
• Voltage 400 V AC, three phase
• Recommended fuses in supply line: maximum 3x630 A
• Typical power consumption: 200kW
The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet).
Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h.
Airflow: max 200 liter/min
Air pressure: min 4,5 bar, recommended 6,0-8,0 bar
Water supply: hot water supply, with a flow of 32 dm3/s.
Water pressure: min 1.5 bar, max 6.0 bar
Operating temperature range:
• Incoming air temperature: -20°C to 50°C
• Relative humidity: 0% to 60%
Raw material/media:
• Relative humidity: 45% to 55% by wieght
• Requested relative humidity: 8% to 15% in the dried material
Capacity:
• The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load
• The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour.
SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of:
• The Machinery Directive 2006/42/EC
• LVD 2006/95/EC
• EMC 2004/108/EC
The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time.
The dryer is already dismantled
All electrical schematics, manual, operating instructions available
Upon request, we can provide a contact person with this type of working dryer for consultation
Price: 30,000.00 EUR (VAT is not included)
The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels.
The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C.
Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur.
Laedpfewp Rqfox Ad Isi
Power supply Data:
• Voltage 400 V AC, three phase
• Recommended fuses in supply line: maximum 3x630 A
• Typical power consumption: 200kW
The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet).
Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h.
Airflow: max 200 liter/min
Air pressure: min 4,5 bar, recommended 6,0-8,0 bar
Water supply: hot water supply, with a flow of 32 dm3/s.
Water pressure: min 1.5 bar, max 6.0 bar
Operating temperature range:
• Incoming air temperature: -20°C to 50°C
• Relative humidity: 0% to 60%
Raw material/media:
• Relative humidity: 45% to 55% by wieght
• Requested relative humidity: 8% to 15% in the dried material
Capacity:
• The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load
• The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour.
SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of:
• The Machinery Directive 2006/42/EC
• LVD 2006/95/EC
• EMC 2004/108/EC
The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time.
The dryer is already dismantled
All electrical schematics, manual, operating instructions available
Upon request, we can provide a contact person with this type of working dryer for consultation
Price: 30,000.00 EUR (VAT is not included)
ספק
הערה: הירשם בחינם או התחבר, כדי לקבל גישה לכל המידע.
נרשם מאז: 2022
שלח בקשה
טלפון & פקס
+371 27 3... מודעות
ייתכן שגם מודעות אלה יעניינו אותך.
מודעה קטנה
Ystad
3,178 km
מְתַחלֵב
GLASSVSM 1000
GLASSVSM 1000
מודעה קטנה
Komenda
2,428 km
מכונת קידוח עם הזנה דרך
SCMStartech CN PLUS-R (BRAND NEW)
SCMStartech CN PLUS-R (BRAND NEW)
מודעה קטנה
Neckartailfingen
2,908 km
גרנולטור, טחנת חיתוך לפלסטיק
mütekMVZ 7,5 kW
mütekMVZ 7,5 kW
מודעה קטנה
Marple
3,859 km
לחסום תחנת חום וכוח
JenbacherJ320 GS
JenbacherJ320 GS
מודעה קטנה
Heerhugowaard
3,418 km
טכנולוגיית מילוי
Glass jar filling and closingline
Glass jar filling and closingline
מודעה קטנה
Gusselby
3,504 km
קו נסור שלם לבולי עץ גדולים
ARI
ARI
מודעה קטנה
Doren
2,802 km
מערכת חימום
SchmidUTSR 900 + UTSR 240
SchmidUTSR 900 + UTSR 240
מודעה קטנה
Aizkraukle
2,941 km
ייצור מוטות/יתדות אוטומטיים
OSWALD
OSWALD
מודעה קטנה
Mezőszemere
2,223 km
דוד קיטור
BRONSWERKOk Ketel J10
BRONSWERKOk Ketel J10
מודעה קטנה
Lugendorf
2,552 km
קו מתיחה
LINCKVM50
LINCKVM50
המודעה שלך נמחקה בהצלחה
אירעה שגיאה



























































































































