מכונת חיתוך בלייזר

Prima Power CV 5000

No reserve price - guaranteed sale to the highest bidder!

TECHNICAL DETAILS

Laser type: CO₂ laser
Average power: 200–5,000 W
Peak power: up to 6 kW
Wavelength: 10.6 µm
Beam quality factor M²:< 2.4 (typically 2.1–2.3)
Beam divergence: 1.5 mrad (half angle)
Beam diameter at output: 15 mm (1/e)
Beam diameter at output: 21 mm (full beam)
Pulse repetition rate: 0–2 kHz
Pulse width: 250 µs
Pulse resolution: 70 µs (?)
Alignment stability: ± 150 µrad (?)

Wavelength: 635 nm
Output power:< 1 mW

MACHINE DETAILS

Ambient temperature: 10–40 °C
Relative humidity:< 95% (non-condensing)

Connected load: 37 kW
Voltage: 400–460 V AC
Voltage tolerance: ± 10%
Power supply: 3-phase

Required cooling capacity: 45 kW
Flow rate: 133 l/min
Inlet temperature: 18–20 °C
Maximum inlet pressure: 6 bar
Nominal inlet pressure: 3 bar
Differential pressure: 1.5 bar
Coolant: Distilled water with 35% Dowfrost HD
Filter rating: 100 µm

Helium purity: 99.996%
Helium concentration: 67.7%
Helium consumption: 13.4–46.8 SLPH
Carbon monoxide purity: 99.995%
Carbon monoxide concentration: 4.1%
Carbon monoxide consumption: 0.9–3.0 SLPH
Nitrogen purity: 99.996%
Nitrogen concentration: 28.2%
Nitrogen consumption: 5.8–20.2 SLPH
Total gas consumption: 20–70 SLPH
Maximum content of water vapor, hydrocarbons, and oxygen:< 10 ppm
Compressed air: dry
Compressed air dew point:< 2 °C

Operating hours (according to meter): 27,875 h