שיחולת מיחזורNext Generation Recyclingmaschinen GmbH
F:Gran 145-20
שיחולת מיחזור
Next Generation Recyclingmaschinen GmbH
F:Gran 145-20
EXW מחיר קבוע בתוספת מע"מ
99,000 €
שנת ייצור
2013
מצב
משומש
(תפקוד מוגבל)
מיקום
Bergen op Zoom 

נתונים בסיסיים
- שם המכונה:
- שיחולת מיחזור
- דגם:
- F:Gran 145-20
- מספר מכונה:
- 12090
- שנת ייצור:
- 2013
- מצב:
- זקוק לתיקון (משומש)
- תפקודיות:
- תפקוד מוגבל
- שעות עבודה:
- 7,700 h
מחיר ומיקום
EXW מחיר קבוע בתוספת מע"מ
99,000 €
- מיקום:
- Bergen op Zoom, הולנד

התקשר
פרטי ההצעה
- מזהה מודעה:
- A22402837
- מספר התייחסות:
- Z032
- עדכון:
- עודכן לאחרונה בתאריך 27.08.2026
תיאור
This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago.
Installed power approx.: 474 kW
Cooling water requirement approx.: 190 l/min
Fresh water consumption approx.: 110 l/h
Codpeznz Ezefx An Eohc
Feeding system:
• Diameter of the feeding screw: 200 mm
• Drive for the feeding screw: 45 kW, frequency-controlled
• Hopper capacity net 7 m³/250 ft³,
• Gear motor 3 × 3 kW
• 2 sight glasses in the hopper
• 2 level indicators
Extruder:
• Diameter of the extruder screw: 145 mm
• L/D ratio: 24
• Heating power: 50 kW
• Extruder drive unit 280 kW
Vacuum 1:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 11 kW
• Vacuum capacity: 225 m³/h
• Vacuum pressure: 33 mbar
Vacuum 2:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 7.5 kW
• Vacuum capacity: 190 m³/h
• Vacuum pressure: 33 mbar
Cylinder:
• Cylinder: Bimetal extruder cylinder,
• Reinforcement layer 1.8–2.0 mm thick,
• Hardness 63–65 HRC
Installation conditions:
• Voltage: 3 × 400 Volts
• Permissible fluctuation max.: +5 % – 5 %
• Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 %
• Protective measure: Multiple grounding
• Ambient temperature: min. 15 °C, max. 35 °C
• Humidity max.: 90 %
• Altitude of the installation site: 0 – 1000 m
The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe.
The details for optimal transport need to be clarified. The machine price is without packaging.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
Installed power approx.: 474 kW
Cooling water requirement approx.: 190 l/min
Fresh water consumption approx.: 110 l/h
Codpeznz Ezefx An Eohc
Feeding system:
• Diameter of the feeding screw: 200 mm
• Drive for the feeding screw: 45 kW, frequency-controlled
• Hopper capacity net 7 m³/250 ft³,
• Gear motor 3 × 3 kW
• 2 sight glasses in the hopper
• 2 level indicators
Extruder:
• Diameter of the extruder screw: 145 mm
• L/D ratio: 24
• Heating power: 50 kW
• Extruder drive unit 280 kW
Vacuum 1:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 11 kW
• Vacuum capacity: 225 m³/h
• Vacuum pressure: 33 mbar
Vacuum 2:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 7.5 kW
• Vacuum capacity: 190 m³/h
• Vacuum pressure: 33 mbar
Cylinder:
• Cylinder: Bimetal extruder cylinder,
• Reinforcement layer 1.8–2.0 mm thick,
• Hardness 63–65 HRC
Installation conditions:
• Voltage: 3 × 400 Volts
• Permissible fluctuation max.: +5 % – 5 %
• Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 %
• Protective measure: Multiple grounding
• Ambient temperature: min. 15 °C, max. 35 °C
• Humidity max.: 90 %
• Altitude of the installation site: 0 – 1000 m
The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe.
The details for optimal transport need to be clarified. The machine price is without packaging.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
מסמכים
ספק
הערה: הירשם בחינם או התחבר, כדי לקבל גישה לכל המידע.
נרשם מאז: 2026
15 מודעות אונליין
שלח בקשה
טלפון & פקס
+43 660 2... מודעות
ייתכן שגם מודעות אלה יעניינו אותך.
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Gdańsk
2,898 km
מכונת תרמופורמינג עיסת נייר
Taiwan Pulp MoldingTPM-1500
Taiwan Pulp MoldingTPM-1500
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Koszalin
2,978 km
מַדחֵס
Wtryskarka automat do termobox fishboxstyropianowych EPS pustaków budowlanych
Wtryskarka automat do termobox fishboxstyropianowych EPS pustaków budowlanych
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Piera
3,168 km
מפעל מיון פסולת
SPR
SPR
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Janville
3,372 km
מכונת שרינק-עטיפה
SmipackBP800AR 280ST
SmipackBP800AR 280ST
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Częstochowa
2,553 km
קו ייצור Meltblown באיכות גבוהה
ReifenhäuserReicofil MB 1600
ReifenhäuserReicofil MB 1600
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Premnitz
3,008 km
מפעל אקסטרוזיה
BARMAGKEP 200-26,3,3-S
BARMAGKEP 200-26,3,3-S
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Leiria
4,032 km
קו אקסטרוזיה Erema D120
EREMAD120
EREMAD120
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Midsomer Norton
3,790 km
Flowrapper
IlapakCarrera 1000/40
IlapakCarrera 1000/40
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Bockhorn
3,290 km
ראש צינור BATTENFELD PE RK 315
BATTENFELDRK 315 Wendel,Siebkorb mit Werkzeug 315 PE
BATTENFELDRK 315 Wendel,Siebkorb mit Werkzeug 315 PE
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
גרמניה
3,006 km
מכבש בורג כפול
Cincinnati ExtrusionARGOS 114P-76-20-1150-UL
Cincinnati ExtrusionARGOS 114P-76-20-1150-UL
המודעה שלך נמחקה בהצלחה
אירעה שגיאה









































































































































































