מכונת כרסום מסוג מיטהMTE
Kompakt Plus
מכונת כרסום מסוג מיטה
MTE
Kompakt Plus
מחיר פתיחה
8,500 €
שנת ייצור
2004
מצב
משומש
(פועל באופן מלא)
מיקום
Nordrhein-Westfalen 

צפה במכירה הפומבית
נתונים בסיסיים
- שם המכונה:
- מכונת כרסום מסוג מיטה
- יצרן:
- MTE
- דגם:
- Kompakt Plus
- מספר מכונה:
- 04120594
- שנת ייצור:
- 2004
- מצב:
- מוכן לעבודה (יד שניה)
- תפקודיות:
- פועל באופן מלא
- שעות עבודה:
- 29,337 h
פרטים טכניים
צירים
מהירות ציר (מקסימלית):
12,000 סל"ד
מפרט ציר
מרחק נסיעה בציר X:
2,000 מ"מ
מרחק תנועה בציר Y:
895 מ"מ
מרחק תנועה ציר Z:
895 מ"מ
פרטים נוספים
דגם בקר:
Heidenhain iTNC 530
הספקה
- מיקום:
- Nordrhein-Westfalen, גרמניה
– מרחק: כ- 3,197 ק"מ
- זמינות:
- מיד לאחר סיום המכירה הפומבית
- תנאי אספקה:
- EXW
עלות פירוק וטעינה:
איסוף באתר:
חינם
חינם
עלות משלוח:
תיאור
TECHNICAL DETAILS
Table size: 2,200 × 750 mm
Travel range X-axis: approx. 2,000 mm
Travel range Y-axis: approx. 895 mm
Travel range Z-axis: approx. 895 mm
Spindle manufacturer: FAEMAT
Spindle type: FA 250 CUV
Spindle cooling: water-cooled
Tool holder: SK50
Spindle speed: max. 12,000 rpm
MACHINE DETAILS
Control system: Heidenhain iTNC 530
Operating hours
Last recorded program runtime: 29,337 h
Machine operating hours: 70,185 h
Control system operating hours: 132,104 h
Ibjde Aknvwjpfx Adyed
EQUIPMENT
Automatic universal milling head
Tool changer
Complete enclosure
Separate cooling unit (year of manufacture 2020)
The spindle has been repaired by a specialist company in the past and subsequently tested. A corresponding test report and various repair and service documents are available upon request.
The machine has a known startup error in the X-axis that has existed for approximately ten years. When starting up, the error message “C380 – Motor X cannot be controlled” sometimes appears. To start the machine, it may be necessary to move the X-motor manually and repeat the startup process several times. Once the machine is running, it operates reliably and without any problems in processing mode, according to our long-standing experience.
The machine is still in productive use.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
Table size: 2,200 × 750 mm
Travel range X-axis: approx. 2,000 mm
Travel range Y-axis: approx. 895 mm
Travel range Z-axis: approx. 895 mm
Spindle manufacturer: FAEMAT
Spindle type: FA 250 CUV
Spindle cooling: water-cooled
Tool holder: SK50
Spindle speed: max. 12,000 rpm
MACHINE DETAILS
Control system: Heidenhain iTNC 530
Operating hours
Last recorded program runtime: 29,337 h
Machine operating hours: 70,185 h
Control system operating hours: 132,104 h
Ibjde Aknvwjpfx Adyed
EQUIPMENT
Automatic universal milling head
Tool changer
Complete enclosure
Separate cooling unit (year of manufacture 2020)
The spindle has been repaired by a specialist company in the past and subsequently tested. A corresponding test report and various repair and service documents are available upon request.
The machine has a known startup error in the X-axis that has existed for approximately ten years. When starting up, the error message “C380 – Motor X cannot be controlled” sometimes appears. To start the machine, it may be necessary to move the X-motor manually and repeat the startup process several times. Once the machine is running, it operates reliably and without any problems in processing mode, according to our long-standing experience.
The machine is still in productive use.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
עיבוד תשלומים
- עלות נלווית לרכישה:
- 18 %
- תנאי תשלום:
- 100 % תשלום מראש
- אמצעי תשלום:
העברה בנקאית
פרטי ההצעה
- מזהה מודעה:
- A23342642
- מספר התייחסות:
- AUC-2611420
- עדכון:
- עודכן לאחרונה בתאריך 16.11.2026
- הצעה בלעדית:
- זמין רק במכירה פומבית
ביקור
אפשרות לבדיקת המוצר
המכונה מחוברת לחשמל
באופן עקרוני, Machineseeker ממליצה לערוך סיור במכונות.
כל הנתונים נמסרים עפ"י מיטב הידיעה והמצפון – ודאו זאת בעצמכם במקום.
ייתכן שגם מודעות אלה יעניינו אותך.
מוצלח
ההודעה שלך נשלחה.
מודעה קטנה
Dortmund
3,193 km
מכונת כרסום מיטת CNC
MTEKompakt Plus
MTEKompakt Plus
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
המודעה שלך נמחקה בהצלחה
אירעה שגיאה























