קו ביקבוק שלם
קו ביקבוק שלם
מצב
משומש
מיקום
Fumane (Verona) 

התמונות מציגות
הצג מפה
נתונים על המכונה
- שם המכונה:
- קו ביקבוק שלם
- מצב:
- משומש
מחיר ומיקום
- מיקום המוכר:
- Via Incisa 1, 37022 Fumane (Verona), איטליה

התקשר
פרטי ההצעה
- מזהה מודעה:
- A18905511
- מספר התייחסות:
- LC545
- עדכון:
- עודכן לאחרונה בתאריך 09.04.2025
תיאור
Used Bottling Line HDPE for dairy products 7200 bph
Used Bottling Line HDPE for dairy products 7200 bph: Structure and Production Capacity
The Used Bottling Line HDPE for dairy products 7200 bph processes and bottles dairy products in high-density polyethylene (HDPE) containers. The line operates at a nominal capacity of 7,200 bottles per hour, optimized for a 0.40-liter format. It uses HDPE bottles weighing 19 to 20 grams, each closed with a polyethylene (PE) snap-on cap weighing 3.2 grams. Although the system has remained idle since 2018–2019, technicians completed a full overhaul before decommissioning. As a result, the Used Bottling Line Serac for HDPE remains in good mechanical condition.
Container Type and Format Flexibility of the Used Bottling Line HDPE
The Used Bottling Line Serac for HDPE handles 400 ml HDPE bottles equipped with snap-on PE caps and sealed with a foil membrane. Its weight-based filling technology guarantees high accuracy and hygienic compliance, which is essential for dairy processing. In particular, this setup of the Used Bottling Line Serac for HDPE suits non-carbonated liquid products. Additionally, operators can upgrade the system to handle 500 ml bottles, with only minimal adjustments required. Unlike threaded capping systems, this line uses press-fit closure, which simplifies maintenance and enhances sealing consistency. Therefore, it provides an effective and reliable solution for bottling in sensitive food sectors.
Bottle Feeding and Preparation Section
At the start of the process of the Used Bottling Line Serac for HDPE, the bottle unscrambler, built by Lanfranchi in 2008, feeds loose HDPE bottles into the conveyor system in the correct orientation. Meanwhile, an Auto Jet Spray unit by Autojet Technologies (2012) cleans the bottle necks using high-pressure air jets, effectively removing dust or particles. Furthermore, Lanfranchi conveyors installed in 2008 transport bottles between stations while maintaining smooth line flow and bottle spacing. These components ensure mechanical integrity and reduce handling errors. As a result, the Used Bottling Line Serac for HDPE achieves both efficiency and reliability in its initial stages.
Weight-Based Filling and Snap-On Capping
The Used Bottling Line Serac for HDPE filling machine, manufactured in 2008, features 12 weight-based filling heads that deliver precise product dosing. Following the filler, a Zalkin cap sorter (U9000, 2008) orients and feeds snap-on caps to the SERAC cap press (CAP PRESSMP2, 2008). The press then applies each cap onto the bottle with controlled vertical pressure. Meanwhile, a foil applicator applies a seal to the container mouth before the cap is pressed. The absence of screw torque components simplifies operation and reduces wear over time.
Sleeve Labeling and Final Packaging of the Used Bottling Line HDPE
After capping in the Used Bottling Line HDPE for dairy products 7200 bph the labeling phase begins.
Ncedpfx Aaswa Tqis Uor
Used Bottling Line HDPE for dairy products 7200 bph: Structure and Production Capacity
The Used Bottling Line HDPE for dairy products 7200 bph processes and bottles dairy products in high-density polyethylene (HDPE) containers. The line operates at a nominal capacity of 7,200 bottles per hour, optimized for a 0.40-liter format. It uses HDPE bottles weighing 19 to 20 grams, each closed with a polyethylene (PE) snap-on cap weighing 3.2 grams. Although the system has remained idle since 2018–2019, technicians completed a full overhaul before decommissioning. As a result, the Used Bottling Line Serac for HDPE remains in good mechanical condition.
Container Type and Format Flexibility of the Used Bottling Line HDPE
The Used Bottling Line Serac for HDPE handles 400 ml HDPE bottles equipped with snap-on PE caps and sealed with a foil membrane. Its weight-based filling technology guarantees high accuracy and hygienic compliance, which is essential for dairy processing. In particular, this setup of the Used Bottling Line Serac for HDPE suits non-carbonated liquid products. Additionally, operators can upgrade the system to handle 500 ml bottles, with only minimal adjustments required. Unlike threaded capping systems, this line uses press-fit closure, which simplifies maintenance and enhances sealing consistency. Therefore, it provides an effective and reliable solution for bottling in sensitive food sectors.
Bottle Feeding and Preparation Section
At the start of the process of the Used Bottling Line Serac for HDPE, the bottle unscrambler, built by Lanfranchi in 2008, feeds loose HDPE bottles into the conveyor system in the correct orientation. Meanwhile, an Auto Jet Spray unit by Autojet Technologies (2012) cleans the bottle necks using high-pressure air jets, effectively removing dust or particles. Furthermore, Lanfranchi conveyors installed in 2008 transport bottles between stations while maintaining smooth line flow and bottle spacing. These components ensure mechanical integrity and reduce handling errors. As a result, the Used Bottling Line Serac for HDPE achieves both efficiency and reliability in its initial stages.
Weight-Based Filling and Snap-On Capping
The Used Bottling Line Serac for HDPE filling machine, manufactured in 2008, features 12 weight-based filling heads that deliver precise product dosing. Following the filler, a Zalkin cap sorter (U9000, 2008) orients and feeds snap-on caps to the SERAC cap press (CAP PRESSMP2, 2008). The press then applies each cap onto the bottle with controlled vertical pressure. Meanwhile, a foil applicator applies a seal to the container mouth before the cap is pressed. The absence of screw torque components simplifies operation and reduces wear over time.
Sleeve Labeling and Final Packaging of the Used Bottling Line HDPE
After capping in the Used Bottling Line HDPE for dairy products 7200 bph the labeling phase begins.
Ncedpfx Aaswa Tqis Uor
ייתכן שגם מודעות אלה יעניינו אותך.
מכירה פומבית
מסתיים בעוד
d
h
min
s
המכירה הפומבית הסתיימה
Gelderland
3,312 km
מכונת הדבקת קנטים
HomagOPTIMAT KAL 310/5/A3/S2
HomagOPTIMAT KAL 310/5/A3/S2
מודעה קטנה
Freising
2,745 km
חומרי מילוי ומכסים לבקבוקי זכוכית
Seitz Enzinger Noll
Seitz Enzinger Noll
מכירה פומבית
מסתיים בעוד
d
h
min
s
המכירה הפומבית הסתיימה
Gelderland
3,312 km
מסור הקפיצה אופטימייזר
StromabTR 500
StromabTR 500
מכירה פומבית
מסתיים בעוד
d
h
min
s
המכירה הפומבית הסתיימה
Gelderland
3,312 km
מכבש כיפוף
OrmaHL/A Digit 25/13
OrmaHL/A Digit 25/13
מודעה קטנה
Fumane (Verona)
2,626 km
קו ביקבוק שלם
מכירה פומבית
מסתיים בעוד
d
h
min
s
המכירה הפומבית הסתיימה
Gelderland
3,312 km
מכבש כיפוף
ColomboThroughput Press
ColomboThroughput Press
מכירה פומבית
מסתיים בעוד
d
h
min
s
המכירה הפומבית הסתיימה
Gelderland
3,312 km
מכונת הדבקת קנטים
Holz-herArcus 1336
Holz-herArcus 1336
מכירה פומבית
מסתיים בעוד
d
h
min
s
המכירה הפומבית הסתיימה
Gelderland
3,312 km
מרכז עיבוד
SCMMorbidelli M600
SCMMorbidelli M600
מכירה פומבית
מסתיים בעוד
d
h
min
s
המכירה הפומבית הסתיימה
Gelderland
3,312 km
מקדחת גנג'
SCMCyflex H800
SCMCyflex H800
מכירה פומבית
מסתיים בעוד
d
h
min
s
המכירה הפומבית הסתיימה
Gelderland
3,312 km
מסור פורמט Fimal Concept 350, שנת ייצור 2016
FimalConcept 350
FimalConcept 350
מכירה פומבית
מסתיים בעוד
d
h
min
s
המכירה הפומבית הסתיימה
Gelderland
3,312 km
מסורי חיתוך לוחות Homag Sawteq B-130 2022
HomagSawteq B-130
HomagSawteq B-130
מכירה פומבית
מסתיים בעוד
d
h
min
s
המכירה הפומבית הסתיימה
Gelderland
3,312 km
מערכת חִלוּץ
Holtrop & JansmaODFS-690
Holtrop & JansmaODFS-690
המודעה שלך נמחקה בהצלחה
אירעה שגיאה











































































































































































