שייבהKitzinger
Spiracon 100
שייבה
Kitzinger
Spiracon 100
שנת ייצור
2024
מצב
חדש
(פועל באופן מלא)
מיקום
Neuenkirchen 

נתונים על המכונה
מחיר ומיקום
- מיקום:
- Parkstraße 4, 17039 Neuenkirchen, Deutschland

התקשר
פרטים טכניים
- אורך כולל:
- 2,900 מ"מ
- רוחב כולל:
- 620 מ"מ
- גובה כולל:
- 1,500 מ"מ
פרטי ההצעה
- מזהה מודעה:
- A22044208
- עדכון:
- עודכן לאחרונה בתאריך 02.06.2026
תיאור
for approx. 100 E2 crates/hour
incl. crate turner (single-person operation)
System layout:
1. Zone – Main washing zone:
– with a centrifugal pump with 2.2 kW
(900 l/min at approx. 1 bar) distributed over a total of
50 stainless steel nozzles, which enable
thorough cleaning of all 4 sides.
A plate filter continuously cleans the washing solution
and filters it continuously.
– Tank volume 180 l
– Washing temperature in the main washing zone 50-55°C
The crate transport takes place via a spiral
(KITZINGER utility model), which ensures
precise crate separation and an unobstructed
impact of the washing solution for comprehensive
cleaning of all sides.
2. Zone – Rinsing area:
– The products cleaned in the machine are thoroughly
rinsed from all sides with fresh water.
The fresh water must be at least 45°C when fed to the
machine and is heated to approx. 80°C in the system.
Approximately 250-300 l are required per hour.
Technical data:
– Overall length of the base machine: 2000 mm
– with crate turner: 2500 mm
– with crate turner and discharge table: 2900 mm
– Machine width: 620 mm
– Machine height: 1500 mm
– Washing tunnel passage width: up to 430 mm (adjustable)
– Washing tunnel passage height: 330 mm
– Total heating power: boiler 1 x 10 kW
– Pump power: 2.2 kW, 900 l/min at 1 bar
– The housing is completely welded and consists
entirely of stainless steel. The substructure is largely made
of 3 mm sheet metal and is therefore very durable.
The machine has the following connections:
– Fresh water at least 45°C, 3/4″,
– Flow pressure at least 1, max. 6 bar via hose connection,
Bwodpfoza Dvuox Afpjr
– Consumption approx. 300 l/h,
IMPORTANT: the machine requires warm fresh water,
connection 1/2″ or 3/4″
– Electricity 14 kW, 400 V, 50 Hz, 32A fuse
– Wastewater DN 40 to floor drain or channel
near the machine, below the machine tank with
standpipe
– with main switch
– powerful centrifugal pump
– system on stainless steel rollers
– sloping discharge side for returning water to the
bottom of the crates
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
incl. crate turner (single-person operation)
System layout:
1. Zone – Main washing zone:
– with a centrifugal pump with 2.2 kW
(900 l/min at approx. 1 bar) distributed over a total of
50 stainless steel nozzles, which enable
thorough cleaning of all 4 sides.
A plate filter continuously cleans the washing solution
and filters it continuously.
– Tank volume 180 l
– Washing temperature in the main washing zone 50-55°C
The crate transport takes place via a spiral
(KITZINGER utility model), which ensures
precise crate separation and an unobstructed
impact of the washing solution for comprehensive
cleaning of all sides.
2. Zone – Rinsing area:
– The products cleaned in the machine are thoroughly
rinsed from all sides with fresh water.
The fresh water must be at least 45°C when fed to the
machine and is heated to approx. 80°C in the system.
Approximately 250-300 l are required per hour.
Technical data:
– Overall length of the base machine: 2000 mm
– with crate turner: 2500 mm
– with crate turner and discharge table: 2900 mm
– Machine width: 620 mm
– Machine height: 1500 mm
– Washing tunnel passage width: up to 430 mm (adjustable)
– Washing tunnel passage height: 330 mm
– Total heating power: boiler 1 x 10 kW
– Pump power: 2.2 kW, 900 l/min at 1 bar
– The housing is completely welded and consists
entirely of stainless steel. The substructure is largely made
of 3 mm sheet metal and is therefore very durable.
The machine has the following connections:
– Fresh water at least 45°C, 3/4″,
– Flow pressure at least 1, max. 6 bar via hose connection,
Bwodpfoza Dvuox Afpjr
– Consumption approx. 300 l/h,
IMPORTANT: the machine requires warm fresh water,
connection 1/2″ or 3/4″
– Electricity 14 kW, 400 V, 50 Hz, 32A fuse
– Wastewater DN 40 to floor drain or channel
near the machine, below the machine tank with
standpipe
– with main switch
– powerful centrifugal pump
– system on stainless steel rollers
– sloping discharge side for returning water to the
bottom of the crates
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
ספק
הערה: הירשם בחינם או התחבר, כדי לקבל גישה לכל המידע.
נרשם מאז: 2026
2 מודעות אונליין
שלח בקשה
טלפון & פקס
+49 395 4... מודעות
ייתכן שגם מודעות אלה יעניינו אותך.
מודעה קטנה
Kaunas
2,793 km
אריזה פלטיזציה לכל מוצר
SchubertTLM-F2 / F44
SchubertTLM-F2 / F44
מודעה קטנה
Misterton
3,787 km
מפקיד שוקולד שוט אחד
Loypackone shot moulding machine
Loypackone shot moulding machine
מודעה קטנה
פולין
2,654 km
חותך קערות
SEYDELMANNK 126 H AC8
SEYDELMANNK 126 H AC8
מודעה קטנה
San Benedetto del Tronto
2,273 km
AMR MiR500
Mobile Industrial RobotsMiR500
Mobile Industrial RobotsMiR500
מודעה קטנה
Valea Călugărească
1,724 km
קו לייצור עוגיות
GEA COMASLTH 400
GEA COMASLTH 400
מודעה קטנה
Dublin
4,114 km
מיכל היתוך
KeyChocINFINITY MT500-P Melting Tank
KeyChocINFINITY MT500-P Melting Tank
מודעה קטנה
Rzeszów
2,368 km
מכונת שטיפה לסלי מאפייה
Winterhalter
Winterhalter
מודעה קטנה
Bydgoszcz
2,804 km
רנטגן
IshidaIX-GN-2443-S
IshidaIX-GN-2443-S
מודעה קטנה
Woolverton
3,780 km
מכונת רנטגן
IshidaIG-GA-2475-S
IshidaIG-GA-2475-S
מודעה קטנה
Levent
1,234 km
PALLETIZER
SchubertMA004564
SchubertMA004564
המודעה שלך נמחקה בהצלחה
אירעה שגיאה













































































