מכונת ריתוך רשתIdeal
GAE 516/07-07-20
מכונת ריתוך רשת
Ideal
GAE 516/07-07-20
EXW מחיר קבוע בתוספת מע"מ
500,000 €
שנת ייצור
2017
מצב
משומש
מיקום
Bünde 

התמונות מציגות
הצג מפה
נתונים על המכונה
- שם המכונה:
- מכונת ריתוך רשת
- יצרן:
- Ideal
- דגם:
- GAE 516/07-07-20
- מספר מכונה:
- GA0500VBG1780
- שנת ייצור:
- 2017
- מצב:
- משומש
- תפקודיות:
- פועל באופן מלא
מחיר ומיקום
EXW מחיר קבוע בתוספת מע"מ
500,000 €
- מיקום:
- Bünde, גרמניה

התקשר
פרטים טכניים
- רוחב עבודה:
- 1,600 מ"מ
- קוטר חוט (מקסימלי):
- 8 מ"מ
- סוג זרם כניסה:
- תלת פאזי
- הספק נומינלי במחזור עבודה של 50%:
- 100 ק״ו״א
- מתח כניסה:
- 400 V
- לחץ אוויר:
- 6 קורה
- נתיך חשמלי:
- 800 A
פרטי ההצעה
- מזהה מודעה:
- A21322147
- עדכון:
- עודכן לאחרונה בתאריך 25.02.2026
תיאור
We are offering this used Ideal GAE 516/07-07-20 mesh welding machine, manufactured in 2017.
Manufacturer: Ideal
Model: GAE 516/07-07-20
Year of manufacture: 2017
Condition: used
Machine type: mesh welding machine
For resistance welding using single-phase DC technology, suitable for shopfitting and industrial mesh panels, wire shelves, reinforcements, and other wire products.
Special features:
- Loading magazine for flat bars (maximum 2,000 mm)
- Automatic feeding of lower cross wires (4 - 8 mm) for the production of double wire mesh panels
- 2 units of trimmers for shearing off cross wire ends on the welded product
The machine is fully operational and can be inspected in operation.
Only approximately 80,000 mesh panels have been produced on this machine in total.
Mesh width: 250 – 1,600 mm
Mesh length: 450 – 2,200 mm
Welding width: 1,600 mm
Longitudinal wire diameter: 2.5 – 8 mm
Cross wire diameter: 2.5 – 8 mm
Minimum longitudinal wire spacing: 25 mm
Minimum cross wire spacing (clear width): 10 mm
Pneumatic welding cylinders: 7 units
Three-phase current 400 V / 50 Hz
Ncsdpfx Asym Aqdobfsn
Fuse: 800 A/phase
Air pressure: 6 bar
Air consumption: 20.0 Nl/cycle
Cooling water consumption, 4 bar, 21-25°C: approx. 80 l/min.
If you have any questions or need further information, please feel free to send us a message or call us.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
Manufacturer: Ideal
Model: GAE 516/07-07-20
Year of manufacture: 2017
Condition: used
Machine type: mesh welding machine
For resistance welding using single-phase DC technology, suitable for shopfitting and industrial mesh panels, wire shelves, reinforcements, and other wire products.
Special features:
- Loading magazine for flat bars (maximum 2,000 mm)
- Automatic feeding of lower cross wires (4 - 8 mm) for the production of double wire mesh panels
- 2 units of trimmers for shearing off cross wire ends on the welded product
The machine is fully operational and can be inspected in operation.
Only approximately 80,000 mesh panels have been produced on this machine in total.
Mesh width: 250 – 1,600 mm
Mesh length: 450 – 2,200 mm
Welding width: 1,600 mm
Longitudinal wire diameter: 2.5 – 8 mm
Cross wire diameter: 2.5 – 8 mm
Minimum longitudinal wire spacing: 25 mm
Minimum cross wire spacing (clear width): 10 mm
Pneumatic welding cylinders: 7 units
Three-phase current 400 V / 50 Hz
Ncsdpfx Asym Aqdobfsn
Fuse: 800 A/phase
Air pressure: 6 bar
Air consumption: 20.0 Nl/cycle
Cooling water consumption, 4 bar, 21-25°C: approx. 80 l/min.
If you have any questions or need further information, please feel free to send us a message or call us.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
מסמכים
המודעה שלך נמחקה בהצלחה
אירעה שגיאה

















































