מחרטה מבוקרת מחזורGildemeister
N.E.F. Plus
מחרטה מבוקרת מחזור
Gildemeister
N.E.F. Plus
FCA VB בתוספת מע"מ
3,800 €
שנת ייצור
1994
מצב
משומש
(לא תקין)
מיקום
Velbert 

התמונות מציגות
הצג מפה
נתונים על המכונה
- שם המכונה:
- מחרטה מבוקרת מחזור
- יצרן:
- Gildemeister
- דגם:
- N.E.F. Plus
- שנת ייצור:
- 1994
- מצב:
- נושא חלפים פגום (משומש)
- תפקודיות:
- לא תקין
- שעות עבודה:
- 68,921 h
מחיר ומיקום
FCA VB בתוספת מע"מ
3,800 €
- מיקום:
- Gewerbestraße 19, 42553 Velbert, Deutschland

התקשר
פרטים טכניים
- חור ציר ראשי:
- 70 מ"מ
- אורך עיבוד בחריטה:
- 1,500 מ"מ
- קוטר חריטה:
- 500 מ"מ
- קוטר סיבוב מעל העגלה הרוחבית:
- 290 מ"מ
- קו נוצה:
- 180 מ"מ
- מהירות ציר (מקסימלית):
- 2,800 סל"ד
- משקל כולל:
- 3,200 ק"ג
פרטי ההצעה
- מזהה מודעה:
- A21806073
- מספר התייחסות:
- Glidemeister_NEF_Plus
- עדכון:
- עודכן לאחרונה בתאריך 28.04.2026
תיאור
Good day,
We hereby offer you, without obligation, a used, defective cycle lathe from the manufacturer Gildemeister.
Manufacturer: Gildemeister
Model: NEF 500 Plus
Year of manufacture: 1994
Total operating hours: 68,921 hours
Turning diameter: 500 mm
Turning length: 1,500 mm
Control system: Manual Plus
Spindle bore diameter: 70 mm
Speed range: 8 – 2,800 rpm
Gear stages: 3
Maximum swing diameter over cross slide: 290 mm
Spindle nose: DIN 55027 size 8
Tool holder type: C
Tailstock quill stroke: 180 mm
Machine weight: approx. 3.2 t
Dimensions (L x W x H): 3.0 x 1.8 x 1.8 m
Note:
The above technical data have been taken from the operating manual, manufacturer brochures, or other sources, for the accuracy and completeness of which we cannot accept any liability.
Scope of supply:
Bsdey Hr U Hjpfx Adrjwl
1 used Gildemeister NEF 500 Plus cycle lathe
Condition:
The cycle lathe is not operational because the control does not power up. The machine can be inspected under power in our workshop, but cannot be put into operation. We are therefore selling the machine as defective.
We would be pleased if this machine is of interest to you.
Your Serviceteam Mertens & Frowein GmbH
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
We hereby offer you, without obligation, a used, defective cycle lathe from the manufacturer Gildemeister.
Manufacturer: Gildemeister
Model: NEF 500 Plus
Year of manufacture: 1994
Total operating hours: 68,921 hours
Turning diameter: 500 mm
Turning length: 1,500 mm
Control system: Manual Plus
Spindle bore diameter: 70 mm
Speed range: 8 – 2,800 rpm
Gear stages: 3
Maximum swing diameter over cross slide: 290 mm
Spindle nose: DIN 55027 size 8
Tool holder type: C
Tailstock quill stroke: 180 mm
Machine weight: approx. 3.2 t
Dimensions (L x W x H): 3.0 x 1.8 x 1.8 m
Note:
The above technical data have been taken from the operating manual, manufacturer brochures, or other sources, for the accuracy and completeness of which we cannot accept any liability.
Scope of supply:
Bsdey Hr U Hjpfx Adrjwl
1 used Gildemeister NEF 500 Plus cycle lathe
Condition:
The cycle lathe is not operational because the control does not power up. The machine can be inspected under power in our workshop, but cannot be put into operation. We are therefore selling the machine as defective.
We would be pleased if this machine is of interest to you.
Your Serviceteam Mertens & Frowein GmbH
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
ספק
הערה: הירשם בחינם או התחבר, כדי לקבל גישה לכל המידע.
נרשם מאז: 2024
23 מודעות אונליין
שלח בקשה
טלפון & פקס
+49 2053 ... מודעות
המודעה שלך נמחקה בהצלחה
אירעה שגיאה










