מערכת השחזה מגנטית ErgomagForplan
PM 3000
מערכת השחזה מגנטית Ergomag
Forplan
PM 3000
שנת ייצור
2023
מצב
משומש
(פועל באופן מלא)
מיקום
Pforzheim 

נתונים בסיסיים
- שם המכונה:
- מערכת השחזה מגנטית Ergomag
- יצרן:
- Forplan
- דגם:
- PM 3000
- מספר מכונה:
- 18439
- שנת ייצור:
- 2023
- מצב:
- משומש
- תפקודיות:
- פועל באופן מלא
מחיר ומיקום
- מיקום:
- Hanauer Straße 5-7, 75181 Pforzheim, Deutschland

התקשר
פרטים טכניים
מידות ומשקל
משקל כולל:
220 ק"ג
אורך כולל:
875 מ"מ
רוחב כולל:
1,010 מ"מ
גובה כולל:
1,610 מ"מ
פרטי הספק
מתח כניסה:
230 V
סוג זרם כניסה:
תלת פאזי
מאפייני בטיחות
עצירת חירום
תיעוד ואישור
תיעוד / מדריך
פרטי ההצעה
- מזהה מודעה:
- A23342666
- עדכון:
- עודכן לאחרונה בתאריך 18.11.2026
תיאור
Forplan Ergomag PM 3000 with ultrasonic cleaning bath, type UPE 25 DGL, year of manufacture 2023, and centrifugal dryer, type 270, year of manufacture 2023.
The Ergomag PM 3000 is used for removing burrs, edges, splinters, and fiber protrusions from workpieces. The process is based on the gentle movement of magnetizable stainless steel pins (cylindrical pins), which are precisely guided by a high-frequency, rotating magnetic field. This enables effective and at the same time material-friendly processing of the component surfaces.
The movement of the stainless steel pins ensures, in particular, the deburring of hard-to-reach areas such as holes, undercuts, and small internal contours. Processing marks from turning, milling, or other machining processes are reliably removed. The result is a homogeneous surface structure, which often eliminates the need for subsequent processing or deburring steps.
The system features a four-bowl assembly made of wear-resistant polyurethane with ergonomic handles for easy removal of the containers. The machine equipment also includes a machine frame, an electrical unit, a motor unit, and a circulation pump. The electrical unit consists of a control cabinet with an integrated operating terminal, which is used to set the relevant process parameters, such as the rotational speed of the magnetic plate and the processing time. The motor unit generates the movement of the magnetic field required for the processing process.
To complement the manufacturing process, an ultrasonic cleaning bath, type UPE 25 DGL, year of manufacture 2023, is integrated into the workflow. The ultrasonic cleaning bath is used for thorough cleaning of the workpieces after the deburring process and reliably removes adhering particles, machining residues, and process media from hard-to-reach areas.
Ibjdo Aknwmspfx Adysd
In addition, a centrifugal dryer, type 270, is available. The centrifugal dryer is used after the cleaning process and ensures fast and gentle drying of the workpieces. This removes residual moisture and water residues.
The combination of magnetic deburring, ultrasonic cleaning, and centrifugal drying creates a continuous process for processing, cleaning, and drying the workpieces. This reduces transport distances, minimizes manual handling steps, and ensures reproducible process quality.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
The Ergomag PM 3000 is used for removing burrs, edges, splinters, and fiber protrusions from workpieces. The process is based on the gentle movement of magnetizable stainless steel pins (cylindrical pins), which are precisely guided by a high-frequency, rotating magnetic field. This enables effective and at the same time material-friendly processing of the component surfaces.
The movement of the stainless steel pins ensures, in particular, the deburring of hard-to-reach areas such as holes, undercuts, and small internal contours. Processing marks from turning, milling, or other machining processes are reliably removed. The result is a homogeneous surface structure, which often eliminates the need for subsequent processing or deburring steps.
The system features a four-bowl assembly made of wear-resistant polyurethane with ergonomic handles for easy removal of the containers. The machine equipment also includes a machine frame, an electrical unit, a motor unit, and a circulation pump. The electrical unit consists of a control cabinet with an integrated operating terminal, which is used to set the relevant process parameters, such as the rotational speed of the magnetic plate and the processing time. The motor unit generates the movement of the magnetic field required for the processing process.
To complement the manufacturing process, an ultrasonic cleaning bath, type UPE 25 DGL, year of manufacture 2023, is integrated into the workflow. The ultrasonic cleaning bath is used for thorough cleaning of the workpieces after the deburring process and reliably removes adhering particles, machining residues, and process media from hard-to-reach areas.
Ibjdo Aknwmspfx Adysd
In addition, a centrifugal dryer, type 270, is available. The centrifugal dryer is used after the cleaning process and ensures fast and gentle drying of the workpieces. This removes residual moisture and water residues.
The combination of magnetic deburring, ultrasonic cleaning, and centrifugal drying creates a continuous process for processing, cleaning, and drying the workpieces. This reduces transport distances, minimizes manual handling steps, and ensures reproducible process quality.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
ספק
הערה: הירשם בחינם או התחבר, כדי לקבל גישה לכל המידע.
נראה לאחרונה באינטרנט: בשבוע שעבר
נרשם מאז: 2026
1 מודעה באינטרנט
שלח בקשה
טלפון & פקס
+49 7231 ... מודעות
המודעה שלך נמחקה בהצלחה
אירעה שגיאה














