Cnc

CNC-STEP High-Z S-1400T/105 (Rev1.5-Facelift 2016)

Used machine

Year of manufacture: 2017

Condition: Well-maintained

Equipment:

Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016)
with ball screws
Travel: 1400 x 1050 x 110 mm (X/Y/Z)

Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz

Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials

Energy arm for S-1350 and S-1400/105
Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc.

T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016)
1790 x 1160 x 76mm

T-slot keys, 8 pcs with bridge, M6 - 10 pcs.
incl. screws M6x25

6 pcs. clamping bars 50x20x10mm M6

Base frame for combination with enclosure for
S-1400T/105 - 1790x1450x900mm (NL2016)

SET - Suhner milling motor UAD 30-RF / 1050W -
3,500-30,000 RPM, 230 Volt, 50/60Hz
incl. 8mm and 10mm collets

Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm

Milling cutter set, 10-piece (shaft 3.175mm)
Wood milling cutter: 2x1mm / 2x2mm / 1x3mm
Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm

Extraction nozzle made of aluminum for Kress or
Suhner milling spindle
Hose nozzle with Ø 32 and 38mm
Dimensions 135x60x30mm

Tangential module EOT-3, stroke 3mm
Oscillating with 3mm stroke

Connection cable for EOT-3 / TCM-4 for High-Z series - 5m

Tungsten carbide blade type E12 - cutting edge 12mm

Tungsten carbide blade type E18 - cutting edge 13.5mm

EcoCam EC-4 continuous cutting pad 4mm / roll width 2m
Always delivered in 2m roll width!!!
1m2 = 2 x 0.5m

Tangential grooving module TCT-1

Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels
Gjdozu T Smopfx Amrjuh

Grooving wheel B14

Grooving wheel B24

Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A)

Maintenance set High-Z series
Grease gun + grease cartridge 400g + 100ml oil

Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation

Kinetic-NC control software
incl. CNC-Pod (LAN), network cable + USB charging cable

Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses

Location: NRW
Availability: Short-term

Sold on behalf of a customer!
Technical data without guarantee!

המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.