תנור תעשייתיROMER
SW-SL
תנור תעשייתי
ROMER
SW-SL
שנת ייצור
2020
מצב
חדש
מיקום
Skarżysko-Kamienna 

התמונות מציגות
הצג מפה
נתונים על המכונה
מחיר ומיקום
- מיקום:
- ul. Rejowska 99, 26-110 Skarżysko-Kamienna, Polska

התקשר
פרטי ההצעה
- מזהה מודעה:
- A4915149
- עדכון:
- עודכן לאחרונה בתאריך 17.05.2024
תיאור
7 "Touch Panel
The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it.
Memory of 20 programs with 10 events
It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve.
This is especially needed for more demanding processes.
Information on gas / oil consumption
The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters
Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive.
The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back.
Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney
The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber.
It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures.
Minute forecast until the end
The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take.
To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back.
In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber.
Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique.
Gedpfxsfz U Tqo Abwein
Each normal oven has only one heating zone and only one temperature measurement!
The multi zone heat system supports up to 8 independent heating zones in one oven.
Each heating zone has as many as 3 temperature sensors!
When there are temperature differences between zones, they are automatically equalized!
The system helps to combat the problem when elements of different material thicknesses enter the furnace.
The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it.
Memory of 20 programs with 10 events
It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve.
This is especially needed for more demanding processes.
Information on gas / oil consumption
The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters
Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive.
The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back.
Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney
The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber.
It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures.
Minute forecast until the end
The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take.
To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back.
In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber.
Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique.
Gedpfxsfz U Tqo Abwein
Each normal oven has only one heating zone and only one temperature measurement!
The multi zone heat system supports up to 8 independent heating zones in one oven.
Each heating zone has as many as 3 temperature sensors!
When there are temperature differences between zones, they are automatically equalized!
The system helps to combat the problem when elements of different material thicknesses enter the furnace.
ספק
הערה: הירשם בחינם או התחבר, כדי לקבל גישה לכל המידע.
נרשם מאז: 2020
שלח בקשה
טלפון & פקס
+48 41 23... מודעות
ייתכן שגם מודעות אלה יעניינו אותך.
מודעה קטנה
Vreden
3,266 km
שַׁנַאי
N/A400kVA
N/A400kVA
מודעה קטנה
Großenlüder
3,018 km
מכולת התזת חול למערכת התזת חול
Oliver Fritz GmbH & Co. KGSandstrahlcontainer High Cube Basic
Oliver Fritz GmbH & Co. KGSandstrahlcontainer High Cube Basic
מודעה קטנה
Tatabánya
2,309 km
רובוטים תעשייתיים
KUKAKR 350/2 (1617)
KUKAKR 350/2 (1617)
מודעה קטנה
Altena
3,168 km
בדים למסננים עבור מסנני לחץ עם תאי סינון
Filtertücher für FilterpressenKurzfristig verfügbar
Filtertücher für FilterpressenKurzfristig verfügbar
מודעה קטנה
Skarżysko-Kamienna
2,514 km
תא ציפוי אבקה
ROMERKPD 3
ROMERKPD 3
מודעה קטנה
Großenlüder
3,018 km
מכולת התזת חול, אולם התזת חול
Oliver Fritz GmbH & Co. KGSC.HC.SDO5800.2S
Oliver Fritz GmbH & Co. KGSC.HC.SDO5800.2S
מודעה קטנה
Moncé-en-Belin
3,478 km
מרכז עיבוד 3 צירים
MAZAK VCN 410 A FUSION 640
MAZAK VCN 410 A FUSION 640
מודעה קטנה
Dietzenbach
3,024 km
מתכת Gringing & קצה מכונת עיגול
NS MaquinasDM 1100 Z2C
NS MaquinasDM 1100 Z2C
מודעה קטנה
Cloppenburg
3,252 km
Schneider 250 kVA 10/0,4 kVDyn5
מודעה קטנה
Hürth
3,189 km
מערכת ציפוי אבקה מיני
Spark / RomerLeasing / Mietkauf
Spark / RomerLeasing / Mietkauf
המודעה שלך נמחקה בהצלחה
אירעה שגיאה












































































