מכונת חותכי אצבעMarinus Machinery
Powermax Finger Jointer & Defect Saw
מכונת חותכי אצבע
Marinus Machinery
Powermax Finger Jointer & Defect Saw
שנת ייצור
2026
מצב
חדש
מיקום
Bakkeveen 

נתונים על המכונה
מחיר ומיקום
- מיקום:
- Mandewyk 1B, 9243 JW Bakkeveen, Nederland

התקשר
פרטים טכניים
- כוח לחץ:
- 25 t
- ציוד:
- דו צדדי
פרטי ההצעה
- מזהה מודעה:
- A13527622
- עדכון:
- עודכן לאחרונה בתאריך 12.01.2026
תיאור
The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing.
About the Finger Jointer
When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process.
Specifications:
Infeed Lenghts: 450 - 6000+ mm
Infeed Widths: 50 - 300 mm
Infeed Thicknesses: 8 - 50 mm
Nedpfx Ajp R Iwhjiaelc
Length modes: Variable / Fixed
Capacity: Up to 8 joints/min
This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide.
This listing on Machineseeker is also made by us: Marinus Machinery.
About the Finger Jointer
When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process.
Specifications:
Infeed Lenghts: 450 - 6000+ mm
Infeed Widths: 50 - 300 mm
Infeed Thicknesses: 8 - 50 mm
Nedpfx Ajp R Iwhjiaelc
Length modes: Variable / Fixed
Capacity: Up to 8 joints/min
This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide.
This listing on Machineseeker is also made by us: Marinus Machinery.
ספק
הערה: הירשם בחינם או התחבר, כדי לקבל גישה לכל המידע.
נרשם מאז: 2018
4 מודעות אונליין
שלח בקשה
טלפון & פקס
+31 516 2... מודעות
ייתכן שגם מודעות אלה יעניינו אותך.
מודעה קטנה
גרמניה
3,006 km
מטוס
WeinigUnimat 23 E
WeinigUnimat 23 E
מודעה קטנה
Helmstedt
3,055 km
הכנסת מכונות
Winkler + Dünnebier (W+D)Buhrs BB 300
Winkler + Dünnebier (W+D)Buhrs BB 300
מודעה קטנה
Velp
3,309 km
מכבש גלולות Andritz Paladin 600B
AndritzPaladin 600B
AndritzPaladin 600B
מודעה קטנה
Krefeld
3,233 km
מסוע רולר
Claus MaschinenbauPalettenrollenbahn
Claus MaschinenbauPalettenrollenbahn
מודעה קטנה
Bovenden
3,064 km
מקצע ומעצב
WEINIGHydromat 23
WEINIGHydromat 23
מודעה קטנה
Brzeźnio
2,637 km
מכונת מסמור לייצור משטחים
ZPHU KarolexXP1000
ZPHU KarolexXP1000
מודעה קטנה
גרמניה
2,920 km
מכונת אריזת סרטים עם מנהרת כיווץ
KallfassKC 5040
KallfassKC 5040
מודעה קטנה
Tatabánya
2,311 km
מלגזה קטרפילר V250
Caterpillar #3226V250
Caterpillar #3226V250
מודעה קטנה
גרמניה
3,006 km
מסוריה שלמה (נייחת)
LinckKCSU 6
LinckKCSU 6
מודעה קטנה
Wijchen
3,312 km
מסור אופטימיזציה לקיצוץ Weinig Opticut S50 2012
WeinigOpticut S50
WeinigOpticut S50
המודעה שלך נמחקה בהצלחה
אירעה שגיאה












































































































