מסוריה שלמה (נייחת)Brenta
Verticale bandzaag / automat. draaiwagen
מסוריה שלמה (נייחת)
Brenta
Verticale bandzaag / automat. draaiwagen
EXW VB בתוספת מע"מ
79,985 €
שנת ייצור
1986
מצב
משומש
מיקום
Beilen 

התמונות מציגות
הצג מפה
נתונים על המכונה
מחיר ומיקום
EXW VB בתוספת מע"מ
79,985 €
- מיקום:
- Beilen, הולנד

התקשר
פרטי ההצעה
- מזהה מודעה:
- A21600703
- עדכון:
- עודכן לאחרונה בתאריך 26.03.2026
תיאור
We are offering this used Brenta Vertical Band Saw with automatic turning carriage.
Year of manufacture: 1986
Vertical saw:
Type Tuonyelec Machine no.: 407482 S230 N8586
Wheels: 125 cm
Saw carriage:
Type Progress 750 Machine no.: 409621 S268 N1143886
Maximum cutting length: 12 meters
In the various photos, you can see:
- overall view of the saw
- saw machine nameplate
- saw with extraction pit
- automatic line behind the saw
- pit under the lower wheel
- infeed line from outside
- infeed line as seen from inside
- outfeed line inside
- extra hoisting bracket to resaw pieces. This bracket can return the log onto the carriage with a chain
- collection bin behind the outfeed line
- collection bin seen from the other side. With red button operable both here and from the machine room
- overview of the outfeed line
- machine plate of the saw carriage
- saw carriage in the outer position, where the log can be loaded
- control room behind the saw
- control room interior. Electronic measurement setting and control of all infeed and outfeed lines
- wall-mounted electronics across from saw. Control current with relays, which can also be operated manually
- Atlas Copco GX 11 FF compressor
- Compressor nameplate, year of manufacture 2005
- Grass Air DW 31 air dryer
- Stellite adjustment blocks for the guides where the saw blades run through
Technical information:
- The machine must be supplied with air, hydraulics, and electricity (including control current)
- The wheels (upper and lower) were ground approximately three years ago and can last for many more years.
- Infeed conveyor control cabinet was renewed in 2025
- At the end of the infeed line, there is a crosscut saw which can trim capping, planks, or beams. This can be set electronically for thickness adjustment.
This Brenta vertical band saw with automatic turning carriage is an excellent combination.
Nwodpfxjyxhq Us Afaod
The listed price is based on the EXW Incoterm, with dismantling by the buyer.
If you have any questions or require further information, please feel free to contact us or give us a call.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
Year of manufacture: 1986
Vertical saw:
Type Tuonyelec Machine no.: 407482 S230 N8586
Wheels: 125 cm
Saw carriage:
Type Progress 750 Machine no.: 409621 S268 N1143886
Maximum cutting length: 12 meters
In the various photos, you can see:
- overall view of the saw
- saw machine nameplate
- saw with extraction pit
- automatic line behind the saw
- pit under the lower wheel
- infeed line from outside
- infeed line as seen from inside
- outfeed line inside
- extra hoisting bracket to resaw pieces. This bracket can return the log onto the carriage with a chain
- collection bin behind the outfeed line
- collection bin seen from the other side. With red button operable both here and from the machine room
- overview of the outfeed line
- machine plate of the saw carriage
- saw carriage in the outer position, where the log can be loaded
- control room behind the saw
- control room interior. Electronic measurement setting and control of all infeed and outfeed lines
- wall-mounted electronics across from saw. Control current with relays, which can also be operated manually
- Atlas Copco GX 11 FF compressor
- Compressor nameplate, year of manufacture 2005
- Grass Air DW 31 air dryer
- Stellite adjustment blocks for the guides where the saw blades run through
Technical information:
- The machine must be supplied with air, hydraulics, and electricity (including control current)
- The wheels (upper and lower) were ground approximately three years ago and can last for many more years.
- Infeed conveyor control cabinet was renewed in 2025
- At the end of the infeed line, there is a crosscut saw which can trim capping, planks, or beams. This can be set electronically for thickness adjustment.
This Brenta vertical band saw with automatic turning carriage is an excellent combination.
Nwodpfxjyxhq Us Afaod
The listed price is based on the EXW Incoterm, with dismantling by the buyer.
If you have any questions or require further information, please feel free to contact us or give us a call.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
ספק
הערה: הירשם בחינם או התחבר, כדי לקבל גישה לכל המידע.
לאחרונה היה/ה באינטרנט: אתמול
נרשם מאז: 2026
1 מודעה באינטרנט
שלח בקשה
טלפון & פקס
+31 6 558... מודעות
המודעה שלך נמחקה בהצלחה
אירעה שגיאה










































