מדף כבד4 Stück Kragarmregal-Ständer einseitig
Höhe 2,56 m/ Nutztiefe 1,0 m/ Länge 4 m
מדף כבד
4 Stück Kragarmregal-Ständer einseitig
Höhe 2,56 m/ Nutztiefe 1,0 m/ Länge 4 m
VB בתוספת מע"מ
1,490 €
שנת ייצור
2024
מצב
מכונה לתצוגה
מיקום
Bad Feilnbach 

התמונות מציגות
הצג מפה
נתונים על המכונה
מחיר ומיקום
VB בתוספת מע"מ
1,490 €
- מיקום:
- Johann-Flitsch-Straße 8, 83075 Bad Feilnbach, Deutschland

התקשר
פרטי ההצעה
- מזהה מודעה:
- A5776089
- עדכון:
- עודכן לאחרונה בתאריך 28.01.2025
תיאור
Cantilever rack in painted version (RAL 7016 anthracite):
Scope of delivery:
4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth)
Laedpfsguk A Hex Agbjk
12 cantilever arms with 1.0 m usable depth
Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m)
Fastening material (screws, nuts and washers)
(*No paint damage!)
Net price on collection: € 1,490.00 plus VAT.
Delivery possible for an additional charge
Detailed description:
- Sturdy steel construction made of IPE profiles (screw system)
- Surface painted in RAL 7016 (anthracite)
- Shelf height 2,560 mm
- Load capacity per upright 1,800 kg
- Foot section and cantilever arms with 1,000 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 screw-on cantilever arms per upright, standard (= 4 storage levels)
- Load capacity per cantilever arm 600 kg
- Including longitudinal and diagonal bracing for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fixing material (without floor anchors)
- With assembly instructions and load plates C4 according to DIN standard
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with notification prior to delivery.
The material is sensibly packed to enable easy unloading.
The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required.
The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
Scope of delivery:
4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth)
Laedpfsguk A Hex Agbjk
12 cantilever arms with 1.0 m usable depth
Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m)
Fastening material (screws, nuts and washers)
(*No paint damage!)
Net price on collection: € 1,490.00 plus VAT.
Delivery possible for an additional charge
Detailed description:
- Sturdy steel construction made of IPE profiles (screw system)
- Surface painted in RAL 7016 (anthracite)
- Shelf height 2,560 mm
- Load capacity per upright 1,800 kg
- Foot section and cantilever arms with 1,000 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 screw-on cantilever arms per upright, standard (= 4 storage levels)
- Load capacity per cantilever arm 600 kg
- Including longitudinal and diagonal bracing for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fixing material (without floor anchors)
- With assembly instructions and load plates C4 according to DIN standard
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with notification prior to delivery.
The material is sensibly packed to enable easy unloading.
The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required.
The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
ייתכן שגם מודעות אלה יעניינו אותך.
מודעה קטנה
Dettingen an der Iller
2,826 km
מרכז עיבוד
HermleC 800 V
HermleC 800 V
מודעה קטנה
Egenhofen
2,770 km
מכונת צחצוח, מכונת מבנה
- ItalyMaster 400.2 ALU
- ItalyMaster 400.2 ALU
מודעה קטנה
Borken
3,259 km
משאבת ואקום, משאבת ואקום סיבוביים שבשבת Rootspumpe
LeyboldRuvac WSU 2001
LeyboldRuvac WSU 2001
מודעה קטנה
Sachsenheim
2,955 km
רדיו כננת כבל הידראולי 1700 ק"ג משיכה
HOLZHÄUER Maschinenbau GmbHHAW1700-EV-Funk
HOLZHÄUER Maschinenbau GmbHHAW1700-EV-Funk
מודעה קטנה
Bad Feilnbach
2,690 km
מתלה שלוחה
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m
מודעה קטנה
Wtelno
2,824 km
מיכלי פלדת פחמן 73m3
Horizontal, 73 000l, 50 units available!Technical drawing available here
Horizontal, 73 000l, 50 units available!Technical drawing available here
מודעה קטנה
Rīga
2,996 km
מקדח ליבת כרוב אוטומטי KU-2400
Alistar EuropeKU-2400
Alistar EuropeKU-2400
מודעה קטנה
Stary Dwór
2,828 km
מכונת קילוף בצל
ProdMaCB-80
ProdMaCB-80
מודעה קטנה
Peskojai
2,960 km
מכבש חגורה
ProFruit MachineryPOWERPRESS 3000
ProFruit MachineryPOWERPRESS 3000
מודעה קטנה
Sierakowska Huta
2,921 km
מגרסת עץ Chipper
KOHLBACH THW-30/30
KOHLBACH THW-30/30
המודעה שלך נמחקה בהצלחה
אירעה שגיאה













































































