משאבת ואקוםBecker
BZ-2
משאבת ואקום
Becker
BZ-2
שנת ייצור
2020
מצב
משומש
מיקום
Oberweis 

התמונות מציגות
הצג מפה
נתונים על המכונה
מחיר ומיקום
- מיקום:
- Gewerbegebiet Süd 6, 4664 Laakirchen, Österreich

התקשר
פרטי ההצעה
- מזהה מודעה:
- A21142922
- מספר התייחסות:
- 200101
- עדכון:
- עודכן לאחרונה בתאריך 20.02.2026
תיאור
Becker BZ-2 - Packaging System
- 2 identical, mirror-inverted packaging lines available
- without cutting machine
- Year of manufacture: 2020
The system first trims the front of the cardboard to remove any possible transport damage. After trimming, a minimum side trim of 30 mm is made on both sides. Additionally, if required, a corner is cut from the cardboard, depending on the Fefco type. Finally, the cardboard is scored along the folding lines and discharged from the machine.
The resulting waste material is removed from the system via a waste conveyor located underneath the machine. At the machine's discharge, a conveyor belt transports the waste into a container. If the side trim sections are too long, they must be cut within the system to ensure they can be smoothly conveyed out of the line.
Hodpfjygipmjx Af Ejni
The blanks and products are transported to the folding station, where the cartons are erected and filled. In the Box Closing Unit, the cartons are sealed, labeled, and conveyed out of the system.
Machine components (see schematic):
(1) Buffer Table | (2) Conveyor Pack System | (3) FT30 Folding Table | (4) Box Closing Unit | (5) Label Applicator | (6) Belt Conveyor | (7) Buffer Table | (8) Conveyor Pack System | (9) FT30 Folding Table | (10) Box Closing Unit | (11) Label Applicator | (12) Belt Conveyor
Technical Data:
Packaging Dimensions (top closure):
- min. carton dimensions LxWxH: 500 x 120 x 100 mm
- max. carton dimensions LxWxH: 2250 x 420 x 320 mm
- max. product weight: 50 kg
Packaging Dimensions (side closure):
- min. carton dimensions LxWxH: 300 x 150 x 120 mm
- max. carton dimensions LxWxH: 1050 x 620 x 470 mm
- max. product weight: 50 kg
Installation:
- Operating voltage: 400 V / 50 Hz
- Rated current: 47 A
- Pre-fuse: 63 A
- Connected load: 32.5 kW
- Control voltage: 24 V
- Compressed air supply: 6 bar
- Air consumption: 10 l/min
- Sound pressure level: < 70 dB(A)
- Machine dimensions WxHxD: 21,260 x 4,000 x 18,030 mm
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
- 2 identical, mirror-inverted packaging lines available
- without cutting machine
- Year of manufacture: 2020
The system first trims the front of the cardboard to remove any possible transport damage. After trimming, a minimum side trim of 30 mm is made on both sides. Additionally, if required, a corner is cut from the cardboard, depending on the Fefco type. Finally, the cardboard is scored along the folding lines and discharged from the machine.
The resulting waste material is removed from the system via a waste conveyor located underneath the machine. At the machine's discharge, a conveyor belt transports the waste into a container. If the side trim sections are too long, they must be cut within the system to ensure they can be smoothly conveyed out of the line.
Hodpfjygipmjx Af Ejni
The blanks and products are transported to the folding station, where the cartons are erected and filled. In the Box Closing Unit, the cartons are sealed, labeled, and conveyed out of the system.
Machine components (see schematic):
(1) Buffer Table | (2) Conveyor Pack System | (3) FT30 Folding Table | (4) Box Closing Unit | (5) Label Applicator | (6) Belt Conveyor | (7) Buffer Table | (8) Conveyor Pack System | (9) FT30 Folding Table | (10) Box Closing Unit | (11) Label Applicator | (12) Belt Conveyor
Technical Data:
Packaging Dimensions (top closure):
- min. carton dimensions LxWxH: 500 x 120 x 100 mm
- max. carton dimensions LxWxH: 2250 x 420 x 320 mm
- max. product weight: 50 kg
Packaging Dimensions (side closure):
- min. carton dimensions LxWxH: 300 x 150 x 120 mm
- max. carton dimensions LxWxH: 1050 x 620 x 470 mm
- max. product weight: 50 kg
Installation:
- Operating voltage: 400 V / 50 Hz
- Rated current: 47 A
- Pre-fuse: 63 A
- Connected load: 32.5 kW
- Control voltage: 24 V
- Compressed air supply: 6 bar
- Air consumption: 10 l/min
- Sound pressure level: < 70 dB(A)
- Machine dimensions WxHxD: 21,260 x 4,000 x 18,030 mm
המודעה תורגמה אוטומטית. ייתכנו שגיאות בתרגום.
מסמכים
המודעה שלך נמחקה בהצלחה
אירעה שגיאה














